03/1/21
CD-E110H(H)E2.fm
E-11
ENGLISH
CD-E110H
Basic
Operati
o
n
Setting the clock
This may be operated only with the remote control.
In this example, the clock is set for the 24-hour (0:00) display.
To confirm the time display:
Press the CLOCK button.
The time display will appear for about 8 seconds.
Note:
The time will flash at the push of the CLOCK button when the AC
power supply is restored after a power failure or unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from the beginning. If the "0:00" is not
flashing in step 2, step 3 (for selecting the 24-hour or 12-hour dis-
play) will be skipped.
To change the 24-hour or 12-hour display:
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK button and within 8 seconds, press the
MEMORY button.
3
Within 30 seconds, press the TUNER PRESET ( or ) but-
ton to select 24-hour or 12-hour display and then press the
MEMORY button.
"0:00"
The 24-hour display will appear.
(0:00
-
23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
Note that this can only be set when the unit is first installed or it
has been reset. [Refer to "Clearing all the memory (reset)" on
page 24 for details.]
4
Within 30 seconds, press the TUNER PRESET ( or ) but-
ton to adjust the hour and then press the MEMORY button.
!
Press the TUNER PRESET ( or ) button once to advance
the time by 1 hour. Hold it down to advance continuously.
!
When the 12-hour display is selected, "AM" will change au-
tomatically to "PM".
5
Within 30 seconds, press the TUNER PRESET ( or ) button
to adjust the minutes and then press the MEMORY button.
!
Press the TUNER PRESET ( or ) button once to advance
the time by 1 minute. Hold it down to advance continuously.
!
The hour will not advance even if minutes advance from "59"
to "00".
1
Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 24 for details.]
2
Perform "Setting the clock" from the beginning.