E-10
E1.fm
01/1/25
ENGLISH
Pre
p
ar
at
ion
f
o
r U
s
e
-S
y
s
te
m Conne
c
tions
-
!
Removing the transport screw
Before turning the power on, be sure to remove the transport screw on the
back of the unit using a flat-blade screwdriver or a coin.
This screw is required when transporting the unit again. Please keep it (see page 32).
!
Aerial connection
FM/AM loop aerial:
Connect the FM/AM loop aerial to the ANTENNA socket.
Position the FM aerial wire and rotate the AM loop aerial for optimum reception.
Place the AM loop aerial on a shelf, or attach it to a stand or a wall.
Notes:
"
Placing the aerial on the stereo system or near the AC power lead may cause
noise pickup. Place the aerial away from the stereo system for better reception.
"
If the AM loop aerial and the FM aerial wire are placed near the AC power lead,
interference may result.
"
Do not connect the attached FM aerial to an external FM aerial. Otherwise, trouble
may occur.
!
Speaker connection
Main terminals:
Connect the blue wire to the (+) and the black one to the (-).
Subwoofer terminals:
Connect the red wire to the (+) and the black one to the (-).
Caution:
"
Connect the speaker wires to the speakers first, then to the unit.
"
Never mistake the MAIN and the SUBWOOFER terminals. The stereo system or
the speakers may be damaged.
"
Only the included speakers should be used with this product. Do not use other
speakers with this unit or use the supplied speakers with other units.
"
Do not mistake the right channel for the left channel when connecting the speak-
ers to the unit. The right speaker is the one on the right side when you are facing
the front of the unit.
"
Do not let the bare speaker wires touch each other.
"
Do not stand or sit on the speakers. You may be injured.
Installing the AM loop aerial:
Assembling
Attaching to the wall
Wall
Screws
Incorrect
Incorrect
1
2
3
Right speaker
Left speaker
Blue
Black
Red
Demonstration mode (See page 14.)
Downloaded from:
