12
Preparation for Use
– Remote Control –
■
Battery installation
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
1. Remove the battery cover.
2. Insert the batteries according to the direction indicated in the bat-
tery compartment.
When inserting or removing the batteries, push them toward the
ë
battery
terminals.
3. Replace the cover.
Precautions for battery use:
●
Replace all old batteries with new ones at the same time.
●
Do not mix old and new batteries.
●
Remove the batteries if the unit will not be used for long periods of time. This will
prevent potential damage due to battery leakage.
Caution:
●
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
●
Installing the batteries incorrectly may cause the unit to malfunction.
Notes concerning use:
●
Replace the batteries if the operating distance is reduced or if the operation be-
comes erratic.
●
Periodically clean the transmitter on the remote control and the sensor on the ste-
reo system with a soft cloth.
●
Exposing the sensor on the stereo system to strong light may interfere with opera-
tion. Change the lighting or the direction of the stereo system.
●
Keep the remote control away from moisture, heat, shock, and vibrations.
■
Test of the remote control
Face the remote control directly to the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the POWER button. Does the power turn on? Now, you can enjoy the music.
8" - 20'
(0.2 m - 6 m)
Remote Control
Remote sensor
