Sharp CD-C478, Service Manual

Page: 12 / 80

CD-C478/478C
– 12 –
1 Top Cabinet 1. Screw ..................... (A1) x4 12-1
2 Side Panel 1. Screw ..................... (B1) x8 12-1
(Left/right)
3 CD Player Unit/ 1. Turn on the power supply, 12-2
CD Tray Cover open the disc tray, take out
the CD cover, and close.
(Note 1)
2. Hook ....................... (C1) x3
3. Hook ....................... (C2) x2
4. Screw ..................... (C3) x1
5. Socket .................... (C4) x3
4 Tuner PWB 1. Socket .................... (D1) x1 13-1
2. Screw ..................... (D2) x5
5 Rear Panel 1. Screw ..................... (E1) x11 12-2
................................... 13-1
6 Main PWB 1. Flat cable ............... (F1) x2 13-1
2. Flat wire ................. (F2) x3
3. Socket ...................... (F3) x3
4. Screw ....................... (F4) x3
7 Front Panel 1. Flat wire ................. (G1) x1 13-2
2. Screw...................... (G2) x2
8 Heat Shink Cover 1. Screw ..................... (H1) x4 13-2
9 Power Amp. PWB 1. Socket .................... (J1) x3 13-2
2. Screw ..................... (J2) x6
10 Power Supply PWB 1. Screw ..................... (K1) x6 13-3
11 Display PWB 1. Knob ....................... (L1) x2 13-4
2. Nut .......................... (L2) x1
3. Screw ..................... (L3)x12
12 CD Switch PWB 1. Screw ..................... (M1) x3 13-4
13 Headphones 1. Screw ..................... (N1) x1 13-4
14 Tape Mechanism 1. Screw ..................... (P1) x6 13-4
15 Turntable 1. Screw ..................... (Q1) x1 13-5
2. Cover ..................... (Q2) x1
16 Disc Tlay 1. Screw ..................... (R1) x2 13-5
2. Guide ..................... (R2) x2
17 CD Player Unit/ 1. Screw ..................... (S1) x1 13-6
CD Servo PWB 2. Socket .................... (S2) x4
18 CD Changer 1. Screw ..................... (T1) x4 14-1
Mechanism
19 CD Mechanism 1. Screw ..................... (U1) x1 14-1
DISASSEMBLY
Caution on Disassembly
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall
outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need to
be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.
4. Take suffcient care on static electricity of integrated
circuits and other circuits when servicing.
Figure 12-2
Figure 12-3
CD-C478/478C
STEP REMOVAL PROCEDURE FIGURE
Note 1:
How to open the changer manually. (Fig. 12-3)
2. Then, turn fully the lock lever in the arrow direction through
the hole on the loading chassis bottom in this state.
After that, push forward the CD player base.
Figure 12-1
CD-C478/478C
LOCK
LEVER
CD Tray Cover
CD Player
Unit
( E1 ) x10
ø3 x8mm
( C3 ) x1
ø3 x8mm
Hook
( C1) x3
( C2 ) x1
( C4 ) x3
Rear Panel
Main PWB
Front Panel
1
1
2
A
Tuner PWB
Pull
(C2) x1
( B1 ) x2
ø3 x8mm
( B1 ) x4
ø3 x8mm
( B1 ) x2
ø3 x8mm
Top Cabinet
Side Panel
(Right)
Rear Panel
Side Panel
(Left)
( A1 ) x2
ø3 x12mm
( A1 ) x2
ø3 x12mm