Sharp CD-BA2000H, Service Manual

Page: 8 / 68

CD-BA2000H
– 8 –
7
Listening to a tape
1
Press the ON/ST
AND-BY b
utton to turn the
po
wer
on.
4
Press the TAPE (1 2) button to select the TAPE 1 or TAPE 2.
3
Load the cassette into the TAPE 1 or TAPE 2 cassette compartment.
2
Open the cassette door by pushing the area marked "PUSH EJECT".
5
Press the button to start playback.
1
Press the ON/ST
AND-BY b
utton to turn the po
wer on.
2
Press the
TUNER (B
AND) b
utton to select FM ST, FM
or AM.
4
Rotate the VOLUME control to adjust the sound volume.
6
Rotate the VOLUME control to adjust the sound volume.
3
Press the
TUNING/TIME ( or ) b
utton to tune in-
to the desired station.
1
45
2
1
2
3
1 4
5
3,6 5 7
Listening to the radio
6
1
Press the ON/ST
AND-BY b
utton to turn the
po
wer
on.
2
Press the CD button.
3
Press the OPEN/CLOSE b
utton to open the disc tra
y.
4
Place the CD(s) on the disc tra
y, label side up.
5
When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the CD in the open pos- ition.
6
Press the OPEN/CLOSE button to closethe disc tray.
Listening to a CD
5
8
TAPE 1
TAPE 2
PUSH
EJECT
PUSH
EJECT
7
Press the b
utton.
12 cm (5") 8 cm (3")
8
Rotate the VOLUME control to adjust the sound volume.
2
3
3
4 6
2
●
And then, close the cassette door completely until it is locked.
●
Resetting the micr
ocomputer
1
Press the ON/ST
AND-BY b
utton to enter
the
stand-b
y
mode
.
2
Whilst pressing down the button and the X-BASS/ DEMO button, hold down the
ON/STAND-BY button for
at least 1 second.
●
"CLEAR AL" will appear
.
Caution:
●
The oper
ation e
xplained abo
ve
will er
ase all data
stored
in memor
y including cloc
k and timer settings
, and tuner
and CD presets.
If this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated in- correctly, it may malfunction or the display may not functi- on correctly. If such a problem occurs, do the following:
●
CD pickup cleaning
1
Press the ON/ST
AND-BY b
utton to turn the po
wer on.
2
Press the CD button and load the desired disc.
3
Load a cassette into the TAPE 2 cassette compartment.
4
Press the REC PAUSE button.
5
Press the button.
Recor
ding fr
om CDs
8
TAPE 2
PUSH
EJECT
3
2
2
1,2
5
4 1 2
Clean the dust or stain on the CD pickup lens using a commercial cleaning disc (brush type).
Cleaning disc