Sharp CD-BA1200H, Service Manual

Page: 45 / 60

– 45 –
CD-BA1200H
54 P120 T2 PLAY SW_B Input PLAY SWITCH FOR T2
55 P119 PPA Input TAPE 2 A–SIDE FULL PROOF
56 P118 FPB Input TAPE 2 B_SIDE FULL PROOF
57 P117 MIC IN Input MIC SWITCH
58* P116 KARAOKE LATCH Output KARAOKE LATCH (When not used. Connect to 0V)
59 P115 DISTOUT/SW OUT Output DISTINATION OUTPUT
60 FIP39 SPN Input TUNER SPAN CHANGE
61*-62* FIP38-FIP37 NO USE Input OPEN
63*-66* FIP36-FIP33 P22-P19 Output FL DISPLAY DRIVER
67-70* FIP32-FIP29 P18-P15 Output FL DISPLAY DRIVER
(68*,69*) P103-P100 DIST3-DIST0 Input DISTINATION INPUT
71-78 FIP28-FIP21 P14-P7 Output FL DISPLAY DRIVER
79 VLOAD VLOAD –– FL DRIVER (–) POWER SUPPLY.–30V
80-85 FIP20-FIP15 P6-P1 Output FL DISPLAY SEGMENT
86-89 FIP14-FIP11 –– Input OPEN
90-100 FIP30-FIP0 G11-G1 Output FL DISPLAY SEGMENT DRIVER
IC701 RH-iX0337AWZZ: System Microcomputer (IX0337AW) (2/2)
Port Name Terminal Name Pin No. Input/Output
In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.
Function
1 IN2- CH2 inverted input.
2 IN1A- CH1 inverted input.
3 IN1B- CH1 output offset control.
4 OUT1- CH1 inverted output.
5 OUT1+ CH1 non-inverted output.
6 OUT2- CH2 inverted output.
7 OUT2+ CH2 non-inverted output.
8-14 GND GND
15 OUT3+ CH3 non-inverted output.
16 OUT3- CH3 inverted output.
17 IN3- CH3 inverted input.
18 VCC1 Power supply 1 (CH1, CH2, CH3)
19 STANDBY STANDBY signal input.
20 VRFE CH1-CH4 Reference voltage input.
21 MUTE Mute signal input (CH6).
22 IN5- CH5 inverted input.
23 IN5+ CH5 non-inverted input.
24 VCC2 Power supply 2 (CH4).
25 IN4- CH4 inverted input.
26 OUT4- CH4 inverted output.
27 OUT4+ CH4 non-inverted output.
28 VCC3 Power supply 3 (CH5).
29-35 GND GND
36* OUT5+ CH5 non-inverted output.
37* OUT5- CH5 inverted output.
38 OUT6+ CH6 non-inverted output.
39 OUT6- CH6 inverted output.
40 VCC4 Power supply 4 (CH6).
41 IN6- CH6 inverted input.
42 IN6+ CH6 non-inverted input.
IC3 VHiM63001FP-1: Focus/Tracking/Spin/Sled Driver (M63001FP)
Pin No. Terminal
Name
Function
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
27
26
25
24
23
22
IN2–
IN1A–
IN1B–
OUT1–
OUT1+
OUT2–
OUT2+
OUT3+
OUT3–
IN3–
VCC1
STANDBY
VTEF
MUTE
GND
GND
VCC3
OUT4+
OUT4–
IN4–
VCC2
IN5+
IN5–
IN6+
IN6–
VCC4
OUT6–
OUT6+
OUT5–
OUT5+
M63001FP
Figure 45 BLOCK DIAGRAM OF IC
In this unit, the terminal with asterisk mark (*) is (open)
terminal which is not connected to the outside.