2
The opening in the wall or cabinet must be within the
following dimensions:
Cut Out
RK56S27 & RK56S30
Height (A)
16
1
/
4
"
Width (B)
26
1
/
8
" to 26
3
/
8
"
Minimum Depth (C)
20"
Outlet should
NOT be in the shaded area as indicated on
Sketch 1.
A
B
4"
C
4"
SKETCH 1
NOTES
• Please allow minimum 3" wood gap between the
microwave oven cutout and the appliance cutout below
the microwave oven. See Sketch 2
3" Min.
Microwave cutout
Wall oven cutout
SKETCH 2
• If the dimension of DEPTH (C) is more than 21", the outlet
location may be any area on the rear wall.
• The floor of the opening should be constructed of plywood
strong enough to support the weight of the oven and floor
load (about 100 pounds). The floor should be level and
90˚ with the face of the cabinet for proper installation and
operation of the oven. Be sure to check the local building
code as it may require that the opening be enclosed with
sides, ceiling and rear partition. The proper functioning of
the oven does not require the enclosure.
STEP 1 CABINET OR WALL OPENING
