manualshive.com logo in svg

Sharp AR-M257 - Digital Imager B/W Laser, Operation Manual

Share
Download
Sharp AR-M257 - Digital Imager B/W Laser Operation Manual Download Page 79

77

5

CLEANING THE MACHINE

DOCUMENT GLASS AND RSPF

If the document glass, RSPF, or scanning glass for originals fed from the RSPF (the long narrow glass surface on 
the right side of the document glass) become dirty, the dirt may appear on copies. Always keep these parts clean.
Stains or dirt on the document glass/RSPF will also be copied. Wipe the document glass, the RSPF and the 
scanning window on the document glass with a soft, clean cloth.
If necessary, dampen the cloth with water. Do not use thinner, benzene, or similar volatile cleaning agents.

Cleaning the scanning glass for RSPF

If white or black lines appear in copies made with using the RSPF, use the provided 
glass cleaner to clean the scanning glass for RSPF.

1

Open the RSPF and take out the glass 
cleaner.

2

Clean the scanning glass with the 
glass cleaner.

3

Return the glass cleaner to its original 
position.

THE BYPASS TRAY PAPER FEED ROLLER

If misfeeds occur frequently when feeding envelopes or other thick paper from the bypass tray, wipe the paper feed 
roller at the feed slot of the bypass tray with a soft, clean cloth moistened with alcohol or water.

Do not spray flammable cleaner gas. Gas from the spray may come in contact with the internal 
electrical components or high-temperature parts of the fusing unit, creating a risk of fire or 
electrical shock.

Surface of document glass

Underside of RSPF

Warning

Example of dirty print image

Black lines

White lines

Scanning glass for RSPF

Bypass tray paper feed roller

05.fm  77 ページ  ２００７年１月１５日　月曜日　午前８時３４分

Summary of Contents for AR-M257 - Digital Imager B/W Laser









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands