Sharp AR-M256, Operation Manual, Page: 4 / 100

2
5
TROUBLESHOOTING AND MAINTENANCE
DISPLAY MESSAGES..................................... 59
TROUBLESHOOTING ..................................... 61
MISFEED REMOVAL....................................... 65
●
MISFEED REMOVAL GUIDANCE .................65
●
MISFEED IN THE RSPF.................................66
●
MISFEED IN THE BYPASS TRAY .................67
●
MISFEED IN THE MACHINE..........................67
●
MISFEED IN THE CENTRE TRAY .................69
●
MISFEED IN THE UPPER PAPER TRAY ......69
●
MISFEED IN THE LOWER PAPER TRAY .....70
●
MISFEED IN THE UPPER EXIT AREA
(when a job separator tray kit or finisher
(AR-FN5A) is installed) ...................................71
●
MISFEED IN AN OUTPUT TRAY
(when a finisher (AR-FN5A) is installed) .........71
REPLACING THE TONER CARTRIDGE ........ 73
STAPLE CARTRIDGE REPLACEMENT......... 74
●
STAPLE JAM REMOVAL ...............................75
CHECKING THE TONER QUANTITY AND
TOTAL COUNT................................................ 75
CLEANING THE MACHINE............................. 76
●
DOCUMENT GLASS AND DOCUMENT
COVER/RSPF.................................................76
●
THE BYPASS TRAY PAPER
FEED ROLLER ...............................................76
6
PERIPHERAL DEVICES AND SUPPLIES
PERIPHERAL DEVICES.................................. 77
●
FINISHER (AR-FN5A) ....................................78
●
500-SHEET PAPER FEED UNIT/
2 x 500-SHEET PAPER FEED UNIT ..............79
●
REVERSING SINGLE PASS FEEDER ..........80
STORAGE OF SUPPLIES ............................... 80
●
PROPER STORAGE ......................................80
7
APPENDIX
SPECIFICATIONS ........................................... 81
MATERIAL SAFETY DATA SHEET................ 83
INDEX............................................................... 91
●
INDEX BY PURPOSE.....................................94
00.fm 2 ページ ２００７年２月８日 木曜日 午後５時３８分