Sharp AR-M208, Service Manual, Page: 25 / 180

AR-M208 SIMULATION 8 - 11
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
Operation/procedure
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
Operation/procedure
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
Operation/procedure
Enter the adjustment value with the 10-key and press the [OK] key, and
the entered value is registered.
Display
items
Content
Setting
range
Default Remark
1:TRAY1 1st cassette 0-99 53 Tray selection:
1st cassette is
specified.
2:OPTION Option cassette 1-99 Tray selection:
2nd cassette is
specified.
3:MANUAL
Manual feed Tray selection:
Manual feed
cassette is
specified.
4:DUPLEX
Back print Tray selection:
Made by user.
50-6
Purpose Adjustment
Function
(Purpose) Used to adjust the print image position (top margin) on
print paper in the copy mode. (SPF/RSPF)
Item Picture quality Image position
(Initial screen) (Input screen) (Executing screen)
Display items Content
Setting
range
Default
1:SIDE1 Surface original scan start
position adjustment value 1-99 50
2:SIDE2 Back original scan start
position set value 1-99 50
3:END EDGE Rear edge void
adjustment value (SPF) 1-99 36
4:LOSS(SIDE1) Surface image loss
quantity set value 1-5 3
5:LOSS(SIDE2) Back image loss quantity
set value 1-5 3
6:REARLOS(SIDE1) Surface rear edge image
loss quantity set value 1-5 3
7:REARLOS(SIDE2) Back rear edge image
loss quantity set value 1-5 3
50-10
Purpose Adjustment
Function
(Purpose) Used to adjust the print image center position.
(Adjustment can be made for each paper feed
section.)
Section Image processing (ICU)
Item Picture quality Image position
Sim50-6 SPF EDGE
1:SIDE1
50
2:SIDE2 50
3:END EDGE 36
1/3 [ 1- 99]
50
(Initial screen) (Input screen) (Executing screen)
Display items Content
Setting
range
Default Remark
1:BYPASS Manual feed 1-99 50 Tray selection:
Manual feed
cassette is
specified.
2:TRAY1 1st cassette Tray selection:
1st cassette is
specified.
3:TRAY2 2nd cassette Tray selection:
2nd cassette is
specified.
4:TRAY3 3rd cassette Tray selection:
3rd cassette is
specified.
5:TRAY4 4th cassette Tray selection:
4th cassette is
specified.
6:DUPLEX Back print Tray selection:
Made by user.
51
51-1
Purpose Adjustment
Function
(Purpose) Used to adjust the OPC drum separation pawl ON
time.
Section Image process (Photoconductor/Developing/Transfer/
Cleaning)
Item Operation
(Initial screen) (Input screen)
Display items Setting range Default
1:600dpi 1-99 50
2:1200dpi Disabled
51-2
Purpose Adjustment
Function
(Purpose) Used to adjust the contact pressure of paper onto the
resist roller in each section (copier paper feed section,
duplex paper feed section, SPF paper feed section).
(When the print image position varies greatly for the
paper or when a lot of paper jam troubles occur, the
adjustment is required.)
Section Paper transport (Discharge/Switchback/Transport)
Item Operation
Sim50-10 PRT.CENTER
1:BYPASS
50
2:TRAY1 50
3:TRAY2 50
1/2
50
Sim51-1 D/F TIMING
1:600dpi 50
2:1200dpi 50
2
Sim51-1 D/F TIMING
2:1200dpi 50
[ 1- 99] 50