Sharp AR-810 Imager, Service Handbook

Page: 141 / 350

4 - 29 AR-651/810 PREVENTIVE MAINTENANCE
32) CLOSE
33) PLUG IN
34) ADJUSTMENT
(1) While pushing the “6” key and the
START key at the same time, turn on
the power switch. The following
message will be shown on the display.
(2) Enter the code number “2”.
(3) When the START key is pressed, the
message display will change as
follows.
(4) If you select and press “DRUM/
CLEANER” on the message display,
the SUB-UNIT key will appear.
(5) When the SUB-UNIT key is pressed,
the message display will change as
follows.
(6) After you have selected “DRUM” by
pressing it on the message display,
press the RESET key.
Note: Only press the RESET key after you
have selected the Item Name (in this
case “DRUM”.
(7) Press the INITIALIZE key. This will
cause the initialization of the counter for
the “DRUM”. The message display will
return to the situation in (5).
(8) Using the message diplay in (5),
“DRUM BLADE”, “DRUM BRUSH” or
“DRUM FINGER” can be initialised in
the same way as “DRUM”.
Note: In the case of “OZONE FILTER”,
initialisation only tahes place when
the ozone filter is replaced, so do not
initialise when changing this unit.