Sharp AR-5516, Service Manual

Page: 48 / 94

AR-5520 SIMULATIONS 7-21
50 10 Paper off-center adjustment Used to adjust the positions of copy images on copy paper and the center offset position when
scanning the document.
(Operatin g procedure)
W hen this simulation is executed, the current set value is displayed. Enter the adjustment value with
the Numeric keys and press the [START] key, and the entered value is stored and a copy is made.
W hen the [Interrupt] key is pressed, the entered value is saved and the machine goes into the sub
code entry standby mode. W hen the [CA] key is pressed, the entered value is saved and the
simulation is terminated.
(
W hen the set value is increased by 1, the position is shifted by 0.1mm.)
(Adjustment range: 1 ~ 99, Default: 50)
<Supplement>
W hen the adjustment value is increased, the image is shifted to the left. W hen the adjustment value
is decreased, the image is shifted to the right.
Supported for the installed models only. Skipped for the models without installation.
Note: W hen the adjustment value is too great, the outside area of shading may be scanned, resulting
in black streaks on copy paper.
W hen printing is made with bypass tray, use A3 paper.
W hen a document is scanned in the OC mode in the back surface center off-set adjustment
and printing is made in the S-D mode, the first document is scanned and then the second
document is scanned automatically.
12 Document off-center adjustment Used to make the document scan off-center adjustment.
(Adjustment range: 1 ~ 99, Default: 50)
*
W hen the adjustment value is increased by 1, the print image is shifted by 0.1mm to the left
when the scan start position is put on the upper side.
<Adjustment item>
Main
code Sub
code
Contents Details of operation
LED Adjustment mode
AUTO, 1st tray indicator
AUTO, 2nd tray indicator
AUTO, 3rd tray indicator
AUTO, 4th tray indicator
AUTO, Bypass tray indicator
TEXT, 1st tray indicator Print center offset (1st tray paper feed)
Print center offset (2nd tray paper feed)
Print center offset (3rd tray paper feed)
Print center offset (4th tray paper feed)
Print center offset (Bypass tray)
2nd print center offset (1st tray paper feed)
W hen this mode is selected, the S-D mode is automatically set.
LED Item Default Variable range
AUTO indicator
TEXT indicator
PHOTO indicator
Platen document scan
SPF document front scan
(Only when the SPF/RSPF is installed)
RSPF document back scan
(Only when the RSPF is installed) 50
50
50
1 ~ 99
1 ~ 99
1 ~ 99