Sharp AR-507 Operation Manual Download Page 110

Page: 110 / 176

6-6

CHAPTER

USER MAINTENANCE

The document glass and the document feeder cover must be kept
clean to avoid dirty areas from being copied onto the copies.

Document glass and document feeder cover

Wipe the document glass and the document feeder
cover with a soft, clean cloth.

●

If necessary, dampen the cloth with water. Do not use thinner,
benzene, or similar volatile cleaning agents.

GENERAL INFORMATION

User maintenance

RSPF scanning section

●

If black lines appear on copies when copying with the RSPF,
wipe the parts shown in the illustration with a soft, clean cloth
dampened with plain water or water containing a small amount
of neutral detergent.

RSPF scanning
section glass

Scanning
guide

Summary of Contents for AR-507

















































































































































































Search results

Summary of Contents for AR-507

Reviews:

Related manuals for AR-507

Brands by name

Popular brands

Sharp AR-507, Operation Manual

Search results

Summary of Contents for AR-507

Reviews:

Related manuals for AR-507

Brands by name

Popular brands