Sharp AR-208D, Operation Manual

Page: 296 / 311

4 WEB FUNCTIONS IN THE MACHINE
33
C O N T E N T S I N D E X
Protecting information programmed in the web page ([Passwords])
Passwords can be set (click [Passwords] in the menu frame) to restrict Web page access and protect settings. The administrator
must change the password from the factory default setting. The administrator must also take care to remember the new password.
The next time the Web pages are accessed, the new password must be entered.
A password can be set for the administrator and a password can be set for users.
1
Click [Passwords] in the menu frame.
2
Enter the current password in "Admin
Password".
When establishing a password for the first time, enter
"Sharp" in "Admin Password".
3
Enter passwords in "User Password" and
"Admin Password".
• A maximum of 7 characters and/or numbers can be
entered for each password (passwords are case
sensitive).
• Be sure to enter the same password in "Confirm
Password" as you did in "New Password".
4
When you have finished entering all items, click
[Submit].
The entered password is stored.
After setting the password, turn the machine power
off and then back on.
Be sure to enter "S" in upper case and "harp" in
lower case (passwords are case sensitive).
Caution
When prompted to enter a password, a user should
enter "user" and an administrator should enter "admin"
in "User Name". In "Password", the respective password
for the entered user name should be entered.
For more information, click [Help] in the upper right-hand
corner of the window.
Note