Sharp AR-203E X Operation Manual Download

Page: 75 / 81

MATERIAL SAFETY DATA SHEET

Page : 2/4

Date Issued : Nov.01, 2007

MSDS No. F-31601

3.HAZARDS IDENTIFICATION

Most Important Hazards and Effects of the Products

Human Health Effects : There are no anticipated carcinogenic effects from exposure based on animal tests

performed using toner. When used as intended according to instructions, studies do not
indicate any symptoms of fibrosis will occur.

Environmental Effects : Not toxic to aquatic organisms

[Estimated from the other product containing similar material]

Specific Hazards

Dust explosion (like most finely divided organic powders)

Directive 1999/45/EC(Europe) :

Not classified as dangerous

4.FIRST-AID MEASURES

Route(s) of Entry : Inhalation?

Skin?

Ingestion?

Possible but very unusual.

Inhalation

Remove to fresh air. If symptoms occur, consult medical personnel.

Skin Contact :

Wash with soap and water for 15 minutes or until particle is removed.

If irritation does occur, consult medical personnel.

Eye

Contact :

Flush eyes immediately with water for 15 minutes. If irritation does occur, consult medical personnel.

Ingestion

Rinse with water and drink several glasses of water. If irritation or discomfort does occur, consult

medical personnel.

5.FIRE-FIGHTING MEASURES

Extinguishing Media

Water, CO

, foam and dry chemicals

Special Fire Fighting Procedures :

None

Fire and Explosion Hazards

Toner material, like most finely divided organic powders, may form an explosive

mixture.

6.ACCIDENTAL RELEASE MEASURES

Personal Precautions

None

Environmental Precautions

None

Methods for Cleaning Up

Wipe off with paper or cloth. Do not use vacuum cleaner when a large amount is

released. It, like most finely divided organic powders, is capable of creating a
dust explosion.

7.HANDLING AND STORAGE

Handling

Technical Measures

: None

Precautions

: None

Safe Handling Advice : Use of a dust mask is recommended when handling a large quantity of toner or during long

term exposure, as with any non-toxic dust. Try not to disperse the particles.

Storage

Technical Measures

: None

Storage Conditions

: Keep container closed and Store in a cool and dry place.

Keep out of the reach of children.

Incompatible Products : None

8.EXPOSURE CONTROLS / PERSONAL PROTECTION

Engineering Measures

Ventilation

: Not required under intended use.

Summary of Contents for AR-203E X


















































































Search results

Summary of Contents for AR-203E X

Reviews:

Related manuals for AR-203E X

Brands by name

Popular brands

Sharp AR-203E X, Operation Manual

Search results

Summary of Contents for AR-203E X

Reviews:

Related manuals for AR-203E X

Brands by name

Popular brands