Security key (security code for various
functions)
If you set any restrictions, you need to enter the security
key to temporarily disable them. [Passcode] ([0000]) is
set as a security key by default but you can change it
(
☞
P. 157 "Security key setting").
z
If you enter wrong security keys five times
continuously, you cannot enter it for 30 seconds.
Network security code
Network security code is a four-digit code required for
confirming the subscriber's identity when an order is
received at a docomo Shop, docomo Information Center
or "お客様サポート" (Support), used for accessing various
network services, etc. You can set any code at the time
of subscription but you can change the code.
z
For details on network security code, refer to the NTT
DOCOMO website.
(
https://www.nttdocomo.co.jp/support/trouble/
password/network/ (in Japanese only)
)
PIN code
A docomo nano UIM card has a security code called PIN
code. This security code is set to [0000] by default but
you can change the code (
☞
lock").
The PIN code is a four- to eight-digit security code that
needs to be entered for recognizing the user of the
handset every time a docomo nano UIM card is inserted
or when a device is turned on to prevent unauthorized
use of the docomo nano UIM card by a third party.
Making/Receiving a call and the device operation are
enabled by entering PIN code.
z
Use the previously set PIN code when inserting a
docomo nano UIM card that has been used in another
device. It is [0000] if the setting has not been
changed.
z
If you enter wrong PIN codes three times continuously,
it is locked and the docomo nano UIM card becomes
unavailable. In this case, unlock with "PUK" (PIN Unlock
Key).
PUK (PIN Unlock Key)
PUK (PIN Unlock Key) is an eight-digit number used to
disable the PIN code lock. You cannot change the code.
z
If you enter wrong codes 10 times continuously, the
docomo nano UIM card is completely locked. In this
case, contact a docomo Shop.
156
Handset Settings
Summary of Contents for AQUOS SH-02L
Page 1: ...38 398 7 8 6 v SH 02L ...
