Sharp AQUOS R, User Manual

Page: 176 / 182

174
The use of accessories that do not satisfy these requirements
may not comply with FCC RF exposure requirements, and
should be avoided. The FCC has granted an Equipment
Authorization for this model handset with all reported SAR
levels evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model handset is on
file with the FCC and can be found under the Display Grant
section of
http://www.fcc.gov/oet/ea/ after searching on FCC
ID APYHRO00249.
Additional information on Specific Absorption Rates (SAR) can
be found on the FCC website at
https://www.fcc.gov/general/
radio-frequency-safety-0 .
FCC ID Location
The device is electronically labeled and the FCC ID can be
displayed from the home screen as follows: Flick Hot Sheet
up
(Settings) About phone Authentication .
The World Health Organization has stated that present
scientific information does not indicate the need for any
special precautions for the use of mobile devices. They note
that if you want to reduce your exposure then you can do so
by limiting the length of calls or using a hands-free device to
keep the mobile phone away from the head and body.
World Health Organization
http://www.who.int/emf
List of Specific Absorption Rates (SAR) for radio waves by
smartphone/3G model
http://www.softbank.jp/mobile/support/sar/ (Japanese)
Water & Dust Resistance
Handset Water & Dust Resistance
Handset has IPX5
1
-, IPX8
2
-equivalent water protection and
IP6X
3
-equivalent dust protection with Card Tray closed firmly
leaving no gap between handset and Card Tray.
1 IPX5 compliant means that a handset continues to
function as a phone after being subjected to a water jet
(approximately 12.5 liters/min.) discharged from a nozzle
(inner diameter: 6.3 mm), from all directions (approximately 3
m from handset) for at least 3 minutes.
2 IPX8 compliant means that a handset continues to function
as a phone after being gently submerged to the depth of
1.5 m in still tap water at room temperature, left there for
approximately 30 minutes, then removed from it.
3 IP6X compliant means that a handset continues to function
as a phone and its safety is maintained after being agitated in
a device containing dust of 75 μm or smaller in diameter for 8
hours and then removed from the device.
・Water and dust resistance may be affected under some
circumstances. Warranty does not cover malfunctions
resulting from misuse.
・Handset is compliant with IPX5 and IPX8 water protection
standards as well as IP6X dust protection standard.
However, ingress of dirt, sand, mud, metal powder, food,
beverage, sea water, etc. may cause malfunction.
■Handset Care
・Close Card Tray firmly leaving no gap between handset and
Card Tray. Any debris (single hair, grain of sand, minute
fiber, etc.) trapped between gasket and contacting surface
may allow ingress of water/dust.
・If handset is exposed to liquids with Card Tray open, they
may enter handset and cause electric shock or malfunction.
Discontinue use and power off.
・If handset is wet, wipe it with a dry cloth.
・Never open/close Card Tray with wet hands or while handset
is wet or has a foreign object adhered to it.
・Do not use Earphones-Microphone Jack or External
Connection Jack while it is wet or obstructed by sand/
dirt; may affect water and dust resistance or may cause
malfunction, burns or fire due to electric shock, short-
circuiting, etc.
・Handset is only water resistant against fresh/tap water
between 5
o
C - 35
o
C.