manualshive.com logo in svg

Sharp aquos PN-L603B, Operation Manual

The Sharp Aquos PN-L603B is an advanced interactive display featuring a sleek design and cutting-edge technology. Enhance your productivity with its high-resolution touchscreen and extensive functionalities. Need assistance operating this device? Look no further! Download the free Operation Manual from manualshive.com to make the most of your Sharp Aquos PN-L603B.

Share
Download
background image

8

E

Contents

IMPORTANT INFORMATION ............................................3
DEAR SHARP CUSTOMER ..............................................4
SAFETY PRECAUTIONS ..................................................4
TIPS AND SAFETY INSTRUCTIONS ...............................6
MOUNTING PRECAUTIONS ............................................7
Supplied Components .....................................................9
System Requirements .....................................................9
Part Names .....................................................................10
Connecting Peripheral Equipment ...............................12
Connecting the Power Cord .........................................14
Binding Cables ...............................................................14
Preparing the Remote Control Unit ..............................15

Installing the batteries ................................................15
Remote control operation range .................................15

Removing the Handles ..................................................16
Mounting a web camera ................................................16
Turning Power On/Off ....................................................17

Turning on the main power.........................................17
Turning power on/off ..................................................17

Touch Panel / Touch Pen Preparations ........................19

Touch Pen ..................................................................19
Computer preparations ..............................................19
Calibration ..................................................................19
Touch Pen (sold separately) .......................................19

Touch action ...................................................................21

Touch action ...............................................................21
Other functions ...........................................................23
Cautionary points .......................................................23
Eraser .........................................................................23

Basic Operation .............................................................24

Using the touch menu ................................................24
Using the remote control unit .....................................25

Menu Items .....................................................................27

Displaying the menu screen .......................................27
Menu item details .......................................................28
Adjustments for PC screen display ............................38

Initialization (Reset)/Functional Restriction Setting 
(FUNCTION) ....................................................................39
Controlling the Monitor with a PC (LAN) .....................40

Settings to connect to a LAN ......................................40
Controlling with a PC ..................................................42
[Advanced operation] Command-based control .........48
[Advanced operation] Communication procedure ......48
[Advanced operation] Control command table ...........50

Troubleshooting .............................................................58

Specifications 

 ...............................................................60

Mounting Precautions  
(For SHARP dealers and service engineers) ...............65

For information on Touch Panel Settings Tool, Pen Software and Touch Display Link, see the manual for each.

Summary of Contents for aquos PN-L603B



































































Reviews:

No comments

Related manuals for aquos PN-L603B

Brands by name

Popular brands

Load more brands