19
Turning On/Off the Power
POWER
POWER
(On/Standby)
Press
POWER
on the TV or on the remote control unit
to turn the power on.
• The Initial Installation starts when the TV powers on for the
fi rst time. If the TV has been turned on before, the Initial
Installation will not be invoked. For changing the settings of
the Initial Installation, perform "EZ setup" on the Initial Setup
menu on page 36.
Press
POWER
on the TV or on the remote control unit
again to turn the power off.
• The TV enters standby and the image on the screen
disappears.
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Weak electric power is still consumed even when the TV is
turned off.
Watching TV
Initial Installation
When you turn on the TV for the fi rst time, it will
automatically memorize the broadcasting channels
available in the region where you live. Perform the
following steps before you press
POWER
on the
remote control unit.
1.
Insert the batteries into the remote control unit. (See page 11.)
2.
Connect the antenna cable to the TV. (See page 11.)
3.
Plug in the AC cord to the AC outlet. (See page 10.)
Language (Language setting)
Select from among 3 languages: English, French and
Spanish.
1
Press
a
/
b
to select the desired language listed
on the screen, and then press
ENTER
.
Language
Location & Time
TV Location
Antenna & Cable/STB
Air/Cable
English
Español
Français
CH Search
Network
Completed
Location & Time
Make settings for the country, area and time zone
where you use the TV.
2
Press
a
/
b
to select "United States", "Canada" or
"Mexico", and then press
ENTER
.
Canada
United States
Mexico
LC-70̲60LE845U̲E.indb 19
LC-70̲60LE845U̲E.indb 19
2012/01/24 14:31:53
2012/01/24 14:31:53
