-
5
Move sensor detection range
6m
90°
35°
NOTE
• Please take precaution not to contact the move sensor with any sharp object, if the sensor is scratch the move sensor
function may not work properly.
• The location of the set (ambient temperature, brightness, etc.) and people condition, may effect the move sensor detection
range.
• If the move sensor is expose to direct sunlight or wind, the move sensor function may not work properly.
• If we placed an object in front of the move sensor, the move sensor function may not work properly.
• Move sensor characteristic is that it can detect the up/down and right/left movement better than the front/back movement.
• After we ON the set for about 1 minute, there are cases where the sensor function is not working.
• Move sensor detect the heat source, below are some cases where it may not detect even when people is present
•
When facing backwards or when wearing very thick clothes, skin expose is not much.
•
Between the set and people, there have obstruction such as fan, sofa, furniture, glass, etc.
•
People is present but very little movement.
•
People is still/not moving.
•
During summer when the room temperature is above 30°C, temperature different between people and room is very small.
• Below are cases when people is not around but the move sensor can detect
•
There is cat or dog moving around in the room.
•
The room curtain or plant is moving due to wind.
•
When using the rotating type air conditioner/heater.
Part names and functions
TV (Rear)
ARC
1
3
AUDIO IN
PC
2
OUTPUT
DC5V 1.5A
15
16
17
18
21
22
23
13
14
12
11
9
10
8
1
2
3
24
4
5
7
6
19
20
4
5
USB 2
DC5V 0.5A
OUTPUT
DC5V 1.5A
HDMI 5
6
INPUT 6
7
INPUT 7
AUDIO OUT
R - AUDIO - L
R - AUDIO - L
R - AUDIO - L VIDEO/Y P
B
(C
B
) P
R
(C
R
)
COMPONENT/AV INPUT
VIDEO
DIGITAL
AUDIO
OUTPUT
CAUTION
Use a Product with the
following thickness for
optimal connection to
HDMI cable/ UBS device.
(DC5V 900mA)
AUDIO(L/R)
RS-232C IOIOI
HDMI 1
ANALOGUE
RGB (PC)
HDMI 4
HDMI 3
HDMI 2
USB 1
C.I.
MHL
1
POWER
(On/Off) button
2
MENU
button
3
INPUT
button
4
Channel up (
r
)/down (
s
) buttons
5
Volume up (
+
)/down (
-
) buttons
6
C.I. (COMMON INTERFACE) slot*
1
7
USB 1 terminal
8
INPUT 2 (HDMI/MHL) terminal
9
Headphone jack ( 3.5 mm)
• The speakers do not output volume when
headphones are plugged in.
10
INPUT 3 (HDMI) terminal
11
OUTPUT terminal (For power output only)*
2
12
INPUT 4 (HDMI) terminal
13
INPUT 5 (HDMI) terminal*
3
14
ETHERNET (10/100) terminal
15
USB 2 terminal
16
DIGITAL AUDIO OUTPUT terminal
17
INPUT 1 (HDMI/ARC) terminal
18
INPUT 8 terminal*
3
19
AUDIO IN terminal
20
Antenna input terminal
21
AUDIO OUT terminals
22
INPUT 7 terminals
23
INPUT 6 terminals
24
RS-232C terminal
*
1
This function applicable for certain countries only.
*
2
This terminal can supply power for dongles. (Availability is depend on the specifi cation of dongle).
*
3
The INPUT 5 and INPUT 8 terminals can both use the same analogue audio input terminal. However, the proper item must
be selected in the “Audio select” menu. (See page 11.)
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
• The illustrations used throughout this manual are based on LC-60LE660X.
LC-406070LE660X_EN_GXX.indd 5
LC-406070LE660X_EN_GXX.indd 5
9/2/2014 9:23:34 AM
9/2/2014 9:23:34 AM
