13
Turning On/Off the Power
Press
POWER
on the TV or on the remote control unit to turn the
power on.
• The Initial Installation starts when the TV powers on for the fi rst time. If the
TV has been turned on before, the Initial Installation will not be invoked. For
changing the settings of the Initial Installation, perform "EZ setup" on the Setup
menu on page 21.
Press
POWER
on the TV or on the remote control unit again to turn the
power off.
• The TV enters standby and the image on the screen disappears.
• If you are not going to use this TV for a long period of time, be sure to remove
the AC cord from the AC outlet.
• Weak electric power is still consumed even when the TV is turned off.
POWER
(On/Standby)
Watching TV
When you turn on the TV for the fi rst time, it will
automatically memorize the broadcasting channels available
in the region where you live. Perform the following steps
before you press
POWER
on the remote control unit.
1.
Insert the batteries into the remote control unit. (See page
10.)
2.
Connect the antenna cable to the TV. (See page 10.)
3.
Plug in the AC cord to the AC outlet. (See page 9.)
Language (Language setting)
Select from among 3 languages: English, French and Spanish.
1
Press
c
/
d
to select the desired language listed on
the screen, and then press
ENTER
.
Language
English
TV Location
TV Location
Select "Home" or "Store" for the location where you plan to
install the TV. This product qualifi es for ENERGY STAR in
Home mode default setting.
2
Press
c
/
d
to select "Home" or "Store", and then
press
ENTER
.
TV Location
Home
Air/Cable
Home:
AV Mode is set to "STANDARD (ENERGY STAR)".
Store:
AV Mode is set to "DYNAMIC (Fixed)".
• ENERGY STAR qualifi cation is based on AV Mode
"STANDARD (ENERGY STAR)".
Air/Cable (Antenna setting)
Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable".
3
Press
c
/
d
to select "Air" or "Cable", and then
press
ENTER
.
Air/Cable
Cable
CH Search
CH Search (Channel search)
Channel auto search makes the TV look for all channels
viewable in the set area.
4
After "Air/Cable" has beet set,
the
cursor moves to
"CH Search".
Press
d
or
ENTER
to start channel search.
Air/Cable
Cable
CH Search
• If no channel is found, confi rm the type of connection made
with your TV and try "EZ Setup" again. (See page 21.)
• For changing the settings of the Initial Installation, perform
"EZ setup" on the Setup menu on page 21.
Initial Installation
POWER
LC-70̲60LE550U̲E̲02.indd 13
LC-70̲60LE550U̲E̲02.indd 13
2012/10/31 16:13:22
2012/10/31 16:13:22
