Sharp Aquos LC-60C6600U Service Manual Download Page 52

Page: 52 / 72

LC-60/70LE660U,C6600U

7 – 1

LC-60LE660U

Service Manual

CHAPTER 7.

MAJOR IC INFORMATIONS

[1] MAJOR IC INFORMATIONS

1. MAJOR IC INFORMATIONS (DKEYMG460FM01)

1.1. IC3301 (RH-iXD729WJQZQ)

This LSI is FULL HIGH-DEFINITION 1080P DIGITAL TV SYSTEM-ON-A-CHIP.

The LSI incorporates a complete ARM dual core

3Ch HDMI 1.4a compliant receiver, Support HDMI CEC interface

One MHL input port(combo with HDMI/DVI) MHL 2.1 compliant, Support up to 1920x1080p @60Hz

Support 1 ports YPrPb video input with Sync-Processor (480i /480p/720p /1080i/1080P)

Support 1 port VGA input up to ADC 170MHz(up to 1600x1200@75Hz)

Support NTSC-M, NTSC-443, PAL(B,D,G,H,I) PAL-M, PAL-N, PAL-60, PAL-CN, SECAM.

High performance adaptive 3D comb filter(NTSC/PAL)

Supports multi-standard TV broadcasting includes BTSC, EIA-J and FM A2.

Fully Support NTSC, PAL, SECAM IF Demodulation.

It supports ATSC demodulators.

Support H.264 encode up to 720P

Support H.264 BP/MP/[email protected]

Support VC-1 SP@ML, MP@HL and AP@L3

Support AVS Jizhun profile (AVS+)

Support RM/RMVB up to 1080p

Support VP6/VP8 1080p decode

Support MPEG 1/2/4

Support JPEG

Support AC3, MPEG1 Layer 1,2 and 3(mp3), and MPEG2 Layer 2, AAC, WMA audio format decoding

Support two-link LVDS transmitter

One SPDIF output and one analog outputs (L-R) are provided.

Support HDMI 1.4ARC

DDR3 embedded

Integrated peripherals include four USB 2.0, UART, counter/timers and GPIO controllers.

1.2. IC3101 (RH-iXD774WJQZQ)

The 4G-bit NAND flash memory device stores the main CPU program and user data.

1.3. IC1701 (VHiTDA7491P-1Y)

The Class-D type digital audio power amplifier 10Wx2ch

Summary of Contents for Aquos LC-60C6600U









































































Search results

Summary of Contents for Aquos LC-60C6600U

Reviews:

Related manuals for Aquos LC-60C6600U

Brands by name

Popular brands

Sharp Aquos LC-60C6600U, Service Manual

Search results

Summary of Contents for Aquos LC-60C6600U

Reviews:

Related manuals for Aquos LC-60C6600U

Brands by name

Popular brands