Preparation
11
Press
POWER
on the TV.
• The initial auto installation wizard appears.
1
Initial auto installation
When the TV powers on for the fi rst time after purchase,
the initial auto installation wizard appears. Follow the
menus and make the necessary settings one after
another.
Confi rm the following before turning on the
power
• Is the antenna cable connected?
• Is the AC cord plugged in?
Setting the on-screen display language.
2
English
Display language settings
Supplying electric power to the
antenna
When you set-up the DTV antenna for the fi rst time,
or connect the antenna to a community antenna, you
need to proceed to set the antenna by following this
manual.
Selected item
Description
On
Select “On” when your antenna is set-up
and connected independently.
Typical supply voltage: 5V
Typical supply current: 50mA
Off
Select “Off” when you do not need to
supply voltage to your antenna, i.e.
when your antenna is connected to a
community antenna. (The factory default
setting of this function is “Off”.)
Press
MENU
and the MENU screen displays.
2
Press
c
/
d
to select “Setup”.
3
Press
a
/
b
to select “Antenna setup-DIGITAL”
and then press
ENTER
.
4
Press
a
/
b
to select “Supply voltage” and
then press
ENTER
.
5
Press
c
/
d
to select “On” and then press
ENTER
.
6
Press
a
/
b
to select the desired language,
and then press
ENTER
.
Press
c
/
d
to select “HOME” or “STORE”,
and then press
ENTER
.
3
HOME
STORE
Select the location of TV.
The picture will be optimized for that location.
• HOME: “STANDARD” will be the default value for
the “AV MODE” setting.
• STORE: “DYNAMIC (Fixed)” will be the default
value for the “AV MODE” setting. If the “AV
MODE” is changed, the TV will automatically
switch back to “DYNAMIC (Fixed)” when there is
no further change to TV setting for 30 minutes.
Press
DTV
to access DTV mode.
1
Digital Search
Major Analogue Channel settings are pre-set.
However, if there are any channel(s) that you
cannot receive with the factory pre-sets, please
perform “Auto Installation” in “Setup” section
(refer chapter “Watching TV” on manual).
Press
ENTER
.
4
• Major Analogue Channel settings are pre-set.
However, if there are any channel(s) that you
cannot receive with the factory pre-sets, please
perform “Auto installation” in “Setup” section.
(See page 20.)
LC-40LE700X_en_b.indd 11
LC-40LE700X_en_b.indd 11
7/8/09 9:34:53 AM
7/8/09 9:34:53 AM
