LC-32/40/46/52LE700UN
2 – 5
[3] OPERATION MANUAL
1. LC-32LE700UN
Attaching the Stand
Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
Attach the stand in the correct direction.
Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1
Confirm that there are 12 screws (all the same size)
supplied with the stand unit.
2
Set the post for the stand unit onto the box.
Attach the base to the post.
Insert and tighten the 8 screws into the 8 holes
on the bottom of the base.
Hold the stand unit securely with one hand, and
then tighten the screws.
FRONT
2
3
1
1
2
1
2
3
1
Screws
3
Insert the stand into the openings on the bottom
of the TV.
Insert and tighten the 4 screws into the 4 holes
on the rear of the TV.
1
1
2
2
Screws
Soft cushion
To detach the stand, perform the steps in reverse order.
Summary of Contents for AQUOS LC-40LE700UN
Page 72: ...LC 32 40 46 52LE700UN 7 2 MEMO ...
Page 118: ...LC 32 40 46 52LE700UN 10 38 MEMO ...
Page 155: ...LC 32 40 46 52LE700UN ...
