42
Repeat steps 1 to 3 in
AQUOS LINK Auto
power on
.
1
Press
a
/
b
to select “Selecting Recorder”,
and then press
ENTER
.
2
Select the recorder, and then press
ENTER
.
3
Selecting recorder
You can select a recorder for the recording from
several connected recorders.
AQUOS LINK
Press
MENU
to exit.
4
NOTE
• If you have connected the AQUOS LINK-compatible audio
system between the TV and a CEC compatible-recorder,
the input source’s indication changes from “INPUT1” to
“INPUT1 (Sub)” as it is shown below.
Operating an AQUOS LINK device
AQUOS LINK allows you to operate the HDMI-
connected device with one remote control.
Use the following procedure to start playback.
Press
PLAY
I
to start playback of a title.
• See page 43, section “
Playback of titles using
AQUOS LINK
” if you want to start playback using
the list of the titles of the AQUOS BD Player.
1
Press
FWD
J
to fast forward.
Press
REV
G
to reverse.
Press
STOP
H
to stop.
Press
POWER
to turn the HDMI-connected
device on/off.
2
Open the remote control unit’s fl ip cover. Press
OPTION
and the AQUOS LINK menu screen
displays.
1
Press
a
/
b
to select “By AQUOS Audio SP”,
and then press
ENTER
.
2
Listening with the AQUOS LINK-
compatible audio system
You can opt to listen to the TV sound only from the
AQUOS LINK-compatible audio system.
• The sound from the TV speaker and headphone
terminal is silenced and only the sound from the
AQUOS LINK-compatible audio system is audible.
• You can use
VOL
k
/
l
and
MUTE
(
e
).
Press
REC
E
to record a programme.
2
Use the following procedure to start recording.
Check the following items before recording.
• Make sure the antenna cable is connected properly.
• Check if the recording media (HDD, DVD, etc.) has enough
capacity for recording a programme.
• Select the equipment for recording in “Selecting Recorder”.
Press
REC STOP
H
to stop recording.
3
Auto Power On
Selecting Recorder
INPUT1
INPUT2
[1. 0. 0. 0]
[2. 0. 0. 0]
Selecting recorder for recording by [REC] button
Auto Power On
Selecting Recorder
INPUT1
INPUT1 (Sub)
INPUT2
[1. 0. 0. 0]
[1. 1. 0. 0]
[2. 0. 0. 0]
Selecting recorder for recording by [REC] button
Recorder EPG
Top Menu/Title List
Media change
By AQUOS Audio SP
By AQUOS SP
Setup Menu
Model select
AQUOS LINK Menu
Sound mode change
After you selected recording media (HDD,
DVD, etc.) in the menu, please make sure the
recording menu in the ready condition.
1
37A65M_en_g.indd 42
37A65M_en_g.indd 42
8/12/2008 2:30:01 PM
8/12/2008 2:30:01 PM
