Sharp Aquos LC-32PD5X, Operation Manual

Page: 43 / 60

Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
2
Press
a
/
b
to select “Colour System”, and
then press ENTER .
3
Press
a
/
b
to select a compatible video signal
system of your equipment, and then press
ENTER .
4
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60
41
Useful adjustment settings
Colour system setting
You can change the colour system to one that is
compatible with the image on the screen.
NOTE
• Factory preset value is “AUTO”.
• If “AUTO” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
Input source
INPUT 1
INPUT 2
Selectable item
AUTO, COMPONENT, VIDEO
AUTO, COMPONENT, VIDEO
Input Select
Selecting input source
Can use for selecting the input source.
Press MENU and the MENU screen displays.
1
Press
c
/
d
to select “Option”.
2
Press
a
/
b
to select “Input Select”, and then
press ENTER .
3
Press
TV/VIDEO
on the remote control unit
or TV/VIDEO on the TV to select the input
source.
• An image from the selected source automatically
displays.
• You can also select the input source by pressing
a
/
b
.
2
Selecting input signal type
For setting the signal type of external equipment.
Press TV/VIDEO on the remote control unit or
TV/VIDEO on the TV.
1
Press
a
/
b
to select a signal type you want to
set, and then press
ENTER
.
4
NOTE
•
If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment for
the signal type.
• When the signal type is set to “AUTO”, the input terminal
where cable is connected is automatically selected.
• When the signal type is set to “AUTO” and multiple video
signal cables are connected, the signal type is selected in
the following prioritised order:
INPUT 1/INPUT 2: COMPONENT
s
VIDEO
PD5X_en_h.indd 41 PD5X_en_h.indd 41 2006/12/22 14:32:44 2006/12/22 14:32:44