background image

 

14

H

 Input label

You can assign each input source a label as you 
prefer.

1

Press 

INPUT

 to select the desired input 

source.

2

Press 

MENU

 and the MENU screen 

displays.

3

Press 

c

/

d

 to select “Setup”.

4

Press 

a

/

b

 to select “Input label”, and then 

press 

ENTER

.

5

Press 

a

/

b

/

c

/

d

 to select a desired 

alphanumeric, and then press 

ENTER

Repeat until the name is fully spelt out. 
Maximum 6 alphanumeric can be input.

External equipment name settings

CLEAR

BACK

END

U V W X Y Z + – . _

KLMNOPQRST

0 1 2 3 4 5 6 7 8 9

A

B C D E F G H I J

To exit, select 

END

 and then press

 ENTER

.

If the wrong alphanumeric is entered, select 

CLEAR

 to clear, and then press

 ENTER

.

NOTE 

• You cannot change labels if the input source is ATV and 

DTV.

H

 Position

For adjusting a picture’s horizontal and vertical 
position.

Selected item

Description

H-Position

Centres the image by moving it to the left 
or right.

V-Position

Centres the image by moving it up or 
down.

Reset

Reset position to factory preset values.

H

 HDMI auto view (HDMI input mode only)

Selected item

Description

Enable/
Disable

Set whether or not to use the Auto 
Selection of WIDE MODE based on signal 
recognition received from the HDMI 
signal.

H

 WSS

WSS allows a television to switch automatically 
among the different screen formats. (On, Off)

NOTE 

 

Try to set the WIDE MODE manually if an image does not 
switch to the correct screen format. When the broadcast 
signal contains no WSS information, the function will not work 
even if enabled.

• Not available for COMPONENT, PC and HDMI signal.

Setup menu (Continued)

Parental rating

This function allows TV channels to be restricted.
It prevents children from watching violent or sexual 
scenes that may be considered inappropriate.

1

Repeat steps 1 to 3 in 

Setting a password

.

2

Press 

a

/

b

 to select “Parental rating”, and 

then press 

ENTER

.

3

Press 

a

/

b

 to select your desired rating, 

and then press 

ENTER

When the country setting is set to “Australia”.

Selected item

Description

General and
above (G)

Content is not offensive to most viewers.

Parental
guidance and
above (PG)

Content is such that parents may 
not want their children to view the 
programme.

Mature and
above (M)

Mature audience only. This programme 
is specifi cally designed to be viewed by 
adults and therefore may be unsuitable 
for children under 15.

Mature adult
and above
(MA)

Mature adult only. Mature audience only. 
This programme is specifi cally designed 
to be viewed by adults and therefore may 
be unsuitable for children under 15.

Adult 
violence and 
above
(AV)

Not for children under age 15. Strong 
elements of sex and/or violence.

Restricted
and above (R)

Not for children under age 18. Strong 
elements of sex and/or violence.

No block (–)

Cancel the blocking.

When the country setting is set to “New Zealand” or 
“Singapore”.

Block 5 age and below

Block 11 age and below

Block 13 age and below

Block 15 age and below

Block 17 age and below

Block 18 age and below

No block

H

 Input skip

This setting allows you to skip the HDMI or RGB 
input on the input source selection operation.

INPUT1(HDMI)

INPUT2(HDMI)

INPUT3(HDMI)

INPUT7(RGB)

Yes

No

Skip input selection of HDMI

LC32M400X_EN_CS2_A5.indd   14

LC32M400X_EN_CS2_A5.indd   14

6/9/2011   2:35:09 PM

6/9/2011   2:35:09 PM

Summary of Contents for Aquos LC-32M400X





































Reviews: