9
10
Film Mode
Automatically detects a fi lm-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyzes it then recreates each still
fi lm frame for high-defi nition picture quality. (On, Off)
Active Contrast
Automatically adjusts the contrast of an image according
to the scene. (On, Off)
3D-Y/C
Provides high quality images with minimal dot crawl and
cross color noise. (On, Off)
NOTE
• 3D-Y/C is not selectable depending on the input signal
type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
Monochrome
For viewing images in monochrome. (On, Off)
DNR (Digital Noise Reduction)
Reduces noise on screen and produces a clearer video
image. (Off, High, Low, Auto)
NOTE
• For resetting all Picture adjustment items to factory preset
values, press
a
/
b
to select “Reset”, press
ENTER
, press
c
/
d
to select “Yes”, and then press
ENTER
.
Audio menu
H
Audio adjustments
Selected item
c
button
d
button
Treble
For weaker treble
For stronger treble
Bass
For weaker bass
For stronger bass
Balance
Decrease audio
from the right
speaker
Decrease audio
from the left
speaker
H
Surround
When you set to “On”, you can enjoy surround
sound, the same as if you were in a movie theater.
(On, Off)
NOTE
• For resetting all Audio adjustment items to the factory
preset values, press
a
/
b
to select “Reset”, press
ENTER
, press
c
/
d
to select “Yes”, and then press
ENTER
.
ECO menu
H
No Signal Off
You can set the TV to automatically power off in
about 15 minutes after the TV goes into a state of
receiving no program signals. (Enable, Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
5
Enter the 4-digit number as a password using
0 — 9
.
6
Enter the same 4-digit number as in step 5 to
confi rm.
NOTE
• To view a locked channel (Lock setting in Programme
Setup “Manual Adjust” is set to “On”), you must enter a
password. When you select a locked channel, “Child lock
has been activated” is displayed.
• Press
ENTER
to display the password input window.
Clearing the password
Allows you to clear your password.
1
Repeat steps 1 to 3 in
Setting a password
.
2
Press
a
/
b
to select “Clear password”, and
then press
ENTER
.
3
Press
c
/
d
to select “Yes”, and then press
ENTER
.
H
Input Skip
This setting allows you to skip the HDMI or RGB
input on the input source selection operation.
H
Input Label
You can assign each input source a label as you prefer.
1
Press
INPUT
to select the desired input source.
2
Press
MENU
and the MENU screen displays.
3
Press
c
/
d
to select “Setup”.
4
Press
a
/
b
to select “Input Label”, and then
press
ENTER
.
5
Press
a
/
b
to select a desired alphanumeric.
Maximum 6 alphanumeric can be input.
Press
c
/
d
to move to the desired alphanumeric
position.
To exit, press
ENTER
.
If the wrong alphanumeric is entered, select [ ]
to clear.
NOTE
• You cannot change labels if the input source is TV.
H
Position
For adjusting a picture’s horizontal and vertical
position.
Selected item
Description
H-Position
Centers the image by moving it to the left
or right.
V-Position
Centers the image by moving it up or
down.
Menu operation
1
Press
MENU
and the MENU screen displays.
–16
0
[ + 8]
[
]
+16
+40
[ + 30]
Picture
Audio
ECO
AV Mode
OPC
Backlight
Contrast
Brightness
[ STANDARD]
[ Off]
2
Press
c
/
d
to select the desired menu. (Picture,
Audio, ECO, Setup, Option)
3
Press
a
/
b
to select the desired menu item.
Press
ENTER
to proceed if necessary.
4
Press
a
/
b
or
c
/
d
to select the desired item
or adjust the item to the desired level. Press
ENTER
if necessary.
Picture menu
H
OPC (Optical Picture Control) setting
You can set the TV to automatically adjust the
screen to suitable backlight brightness according to
the lighting conditions.
Selected item
Description
On:Display
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
On
Automatically adjusts.
Off
The brightness is fi xed at the value set in
“Backlight”.
NOTE
• Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
H
Picture adjustments
Selected item
c
button
d
button
Backlight
The screen dims
The screen
brightens
Contrast
For less contrast
For more contrast
Brightness
For less brightness For more
brightness
Colour
For less color
intensity
For more color
intensity
Tint
Skin tones become
reddish
Skin tones become
greenish
Sharpness
For less sharpness For more
sharpness
H
Advanced
Colour Temp. (Colour Temperature)
Adjusts the color temperature to give the best white
image. (High (white with bluish tone), Mid-High, Middle,
Mid-Low, Low (white with reddish tone)).
ECO menu (Continued)
NOTE
• When a TV program fi nishes, and the TV receives signal
input, this function may not operate.
H
Power Management (PC input mode only)
You can set the TV to automatically power off when
no image is displayed on PC.
Selected item
Description
Off
• No power management.
• Factory preset value.
Mode1
• If no signal inputs for approximately 8
minutes, the power shuts down.
• Even if you start using the PC and the
signal inputs again, the TV stays off.
• The TV turns on again by pressing
POWER
.
Mode2
• If no signal inputs for approximately 8
seconds, the power shuts down.
• When you start using the PC and the
signal inputs again, the TV turns on.
• The TV turns on again by pressing
POWER
.
H
No Operation Off
You can set the TV to automatically power off when
no TV operation is performed for more than 3 hours.
(30 min., 3 hr., Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
H
Ecology
When set to “Yes”, the TV activates the following
power saving mode.
• “OPC” set to “On” (Page 9)
• “No Signal Off” set to “Enable” (Page 9)
• “Power Management” set to “Mode1” (Page 10)
• “No Operation Off” set to “3 hr.” (Page 10)
• “Quick Start” set to “Off” (Page 11).
NOTE
• Ecology mode cannot be deactivated by selecting “No”.
Each setting must be changed individually to deactivate
Ecology mode.
Setup menu
H
Child Lock (TV input mode only)
Allows you to use a password to protect certain
settings from being accidentally changed.
Setting a password
1
Repeat steps 1 to 2 in
Menu operation
.
2
Press
a
/
b
to select “Child Lock”, and then
press
ENTER
.
3
If you already set the password, enter it here.
4
Press
a
/
b
to select “Change password”, and
then press
ENTER
.
LC32M400M_EN SPC.indd 5
LC32M400M_EN SPC.indd 5
4/29/2011 10:46:33 AM
4/29/2011 10:46:33 AM
