Sharp Aquos LC-32LE700S Operation Manual Download Page 35

Page: 35 / 52

Display settings

Channel display

You can display the channel information by pressing

on the remote control unit.

DTV mode

ATV mode

Audio (ENG) STEREO

Video

Subtitle
New information

STEREO

Subtitle
New information

Four digit numbers (e.g., 0001) are displayed after selecting the
five Nordic countries in the country setting.

Time display in channel information

You can display the time information included in DTV and
teletext broadcasts.

NOTE

Skip step 1 if receiving DTV broadcasts.

Select a TV channel (the time information is
automatically captured).

Press

. The channel display will appear on

the TV.

Press

again within the several seconds

that the channel display is on the screen. Time
information will be shown in the lower-right
corner of the screen for several seconds.

Even when you change the TV channel, you
can display the time information with steps 2
and 3 above.

NOTE

If acquired successfully, the time information will appear in the
upper-right corner of the screen by pressing

•

Time and title display

Option

Time display

This function allows you to display the clock time in the
lower-right corner of the screen.

Item

Displays the clock time.

On (half-hourly)

Displays the clock time in 30-minute
increments.

Off

Hides the clock time.

Time format

You can select the time format (either “24HR” or “AM/
PM”) for the clock time.

Option

Game play time

This function allows you to display the elapsed time on
the screen when “AV MODE” is set to “GAME”.

Item

Under connecting a game console to
the TV, the elapsed time is displayed
in 30-minute increments after you start
playing a game.

Off

Hides the time.

NOTE

This menu is not selectable if the input source is “TV” or “USB”.

Option

Programme title display

This function allows you to display programme
information such as the title and airtime by tuning a
channel.

NOTE

This function is available only when the DTV mode is selected.

•

Useful viewing functions

LC-LE705E_GB.indd 33

2009/10/09 14:13:16

Summary of Contents for Aquos LC-32LE700S





















































Search results

Summary of Contents for Aquos LC-32LE700S

Reviews:

Related manuals for Aquos LC-32LE700S

Brands by name

Popular brands

Sharp Aquos LC-32LE700S, Operation Manual

Search results

Summary of Contents for Aquos LC-32LE700S

Reviews:

Related manuals for Aquos LC-32LE700S

Brands by name

Popular brands