Sharp Aquos LC-32FB500E, Service Manual

Page: 20 / 76

20
Page Line Sub
Page
Item Description Remarks (adjustment details, etc.)
01/17 [SHARP FACTORY MENU
7 ETC EEP, Autoinstallation, Op-
tion, Country, L Error...
Press “OK” to enter to ETC Submenu
09/17 EEP Clear Clear NVM data
EEP Clear B
Clear NVM data (except adjustments area).
Standby cause reset Reset of STANDBY CAUSE.
Autoinstallation SW Off
On: Pending to execute on next power on. Off: Not required.
Pattern 0 Selection of internal pattern from 0 up to 6…
L Error Reset 0
LAMP ERR RESET Initialization of L_ERR.
L Error Check On L_ERR detection. 0: activated. 1: deactivated.
I2C OFF Off I2C BUS status. On: free BUS. Off: Normal.
Sharp protocol On Remote Control Protocol. On: SHARP Off: MSTAR.
8 PUBLIC MODE (1/2) PUBLIC MODE Submenu Press “OK” to enter to PUBLIC MODE Sub-
menu
10/17 Power On fi xed Variable Press “ ◄ ” or “ ► ” to change Variable/Fixed.
Maximum volume 60
Press “
◄
” or “
►
” to change 0/60.
Volume fi xed Variable
Press “
◄
” or “
►
” to change Variable/Fixed.
Volume fi xed Level 20
Press “
◄
” or “
►
” to change 0/60.
RC button Respond
Press “
◄
” or “
►
” to change Respond/No respond.
Panel button Respond Press “
◄
” or “
►
” to change Respond/No respond.
Menu button Respond
Press “
◄
” or “
►
” to change Respond/No respond.
On screen display On Press “
◄
” or “
►
” to change On/Off.
Input mode start Normal
Press “
◄
” or “
►
” to change Normal/TV/SCART1/…
Input mode fi xed Variable Press “ ◄ ” or “ ► ” to change Variable/Fixed.
Input TV mode program
number Normal
RC path through Off
Press “
◄
” or “
►
” to change On/Off (required external
module)
PUBLIC MODE (2/2) PUBLIC MODE Submenu
11/17 Hotel mode Off
Press “
◄
” or “
►
” to change On/Off.
Reset
Press “
◄
” or “
►
” to return to factory settings.
Execute Press “
◄
” or “
►
” to confirm (“OK” will be dis-
played).
9 SMART LOADER SMART LOADER Sub-
menu Press “OK” to enter to SMART LOADER Sub-
menu
12/17 Save settings to USB
Press “
◄
” or “
►
” to Save.
(“OK” or “NO USB drive available, please check
and/or insert USB dri…” will be displayed).
Load settings from USB
Press “
◄
” or “
►
” to Load.
(“OK, reboot TV set” or “NO USB drive avail-
able, please check and/or insert USB dri…”
will be displayed).
10 ADC ADJUST ADC ADJUST Submenu Press “OK” to enter to ADC ADJUST Submenu
13/17 MODE YPbPr(SD)
Press “
◄
” or “
►
” to change RGB/YPbPr(SD)/ YPbPr(HD).
ADJUST External singal Press “ ◄ ” or “ ► ” to change Internal signal/External signal.
External: factory. Internal: service
R-GAIN 65 Press “
◄
” or “
►
” for manual adjustment.
G-GAIN 66
Press “
◄
” or “
►
” for manual adjustment.
LC-32FH500
LC-32FH510