22
6. Video Signal Adjustment Procedure
6.1. RGB SCART ADC
1. Enter in Service mode.
2. Press “
▼
” until selecting “ADC ADJUST” option.
3. Press “OK”.
4. “ADC ADJUST” menu appears. Fig. 7.
5. Press “
▼
” until selecting “ADJUST” option.
6. Press “
►
”until selecting “Internal Signal”.
7. Press “
▲
”until selecting “MODE” option.
8. Press “
►
”until selecting “RGB”.
9. Press “
▼
” until selecting “AUTO ADC” option.
10. Press “
►
”, the adjustment starts.
11. “SUCCESS” appears when the adjustments
fi
nish.
12. Exit of Service mode.
6.2. COMPONENTS ADC
1. Enter in Service mode.
2. Press “
▼
” until selecting “ADC ADJUST” option.
3. Press “OK”.
4. “ADC ADJUST” menu appears. Fig. 7.
5. Press “
▼
” until selecting “ADJUST” option.
6. Press “
►
”until selecting “Internal Signal”.
7. Press “
▲
”until selecting “MODE” option.
8. Press “
►
”until selecting “YPbPr(SD)”.
9. Press “
▼
” until selecting “AUTO ADC” option.
10. Press “
►
”, the adjustment starts.
11. “SUCCESS” appears when the adjustments
fi
nish.
Note
: both SD and HD are adjusted.
12. Exit of Service mode.
LC-32DH500