LC-32D44U
5 – 14
8.5. Component 33K signal adjustment
8.6. Analog RGB signal adjustment
8.7. Tuner/V-Chip test
Adjustment item
Adjustment conditions
Adjustment procedure
1
Setting
1080i signal
Feed the 100% color bar signal to VIDEO 1 COMPONENT input.
2
Automatic adjust-
ment execution
Move the cursor to [
COMP 33K ADJ] and press the [ENTER] key.
When [
COMP 33K ADJ OK] appears, the adjustment is complete.
Adjustment item
Adjustment conditions
Adjustment procedure
1
Setting
Analog RGB signal: XGA
(1024x768) 60Hz
SYNC: HV separate
Feed the XGA 100% color bar signal to ANALOG RGB input.
2
Automatic adjust-
ment execution
Move the cursor to [
ANALOG RGB ADJ] and press the [ENTER] key.
When [
ANALOG RGB ADJ OK] appears, the adjustment is complete.
Adjustment item
Adjustment conditions
Adjustment procedure
1
Setting
NTSC RF signal
US-7(AIR)ch
Feed the NTSC signal to RF ANTENNA input.
2
Automatic adjust-
ment execution
Move the cursor to [
TUNER VCHIP TEST (*07ch)] and press the [ENTER] key. (*
Select the channel according to the RF signal.)
When [
A-OK(***.**)/VM-OK] appears in blue, the test is complete. (If [A-NG/VM-NG]
appears in yellow or red, the test is incomplete.)
Make sure a displacement of
±
0.0625 MHz from the center frequency is acceptable.
0% black
1080i
100% color bar
100% white
100% Color saturation
0% black
XGA
100% color bar
100% white
100% Color saturation