other useful features
Setting when using external devices
input Select
option
item
eXt 1:
Y/C, CVBS, RGB
eXt 2:
Y/C, CVBS, RGB
eXt 3:
Auto, S-VIDEO, VIDEO
For setting the signal type of external equipment.
input source settings
note
•
if no (colour) image displays, try changing to another
signal type.
• Check the operation manual of the external equipment for
the signal type.
• When the signal type is set to “Auto”, the input terminal
where a cable is connected is automatically selected.
input label
Setup
You can assign each input source a label as you prefer.
Press
b
to select the desired input source.
Go to MENU> Setup> Input Label.
Press
a
/
b
/
c
/
d
to select each character of
the new name for the input source, and then
press
oK
.
A
BACK
CLEAR
END
K
U
B
L
V
C
M
W
D
DVD
N
X
E
O
Y
F
P
Z
G
Q
+
H
R
–
_
I
S
.
J
T
0 1 2 3 4 5 6 7 8 9
Repeat until the name is fully spelt out.
note
• The name can be 6 characters or less.
• When you want to set an input source name of less than 6
characters, select “END” to set the name.
INPUT SOURCE
TV
EXT1
EXT2
EXT3
DVD
EXT5
EXT6
note
• You cannot change labels if the input source is TV.
1
2
3
4
Skipping specified input
input Skip
Setup
This setting allows you to skip the SCART, HDMI or
RGB input on the “Input Select” menu.
EXT 1 (SCART)
EXT 2 (SCART)
EXT 4 (HDMI)
EXT 5 (HDMI)
EXT 6 (HDMI)
EXT 7 (RGB)
Y es
No
You can change the colour system to one that is
compatible with the image on the screen.
note
• The factory preset value is “Auto”.
• If “Auto” is selected, the colour system for each channel
is automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, SECAM).
additional features
Standby mode
Setup
You can reduce the TV’s start-up time after turning on
the power with the remote control unit.
item
mode1:
The TV quickly starts up from standby.
30W or more of power consumption is required.
mode2:
Power consumption is small during standby.
Colour system settings
Colour System
option