11
CLEAR
*
X
(POWER) button
INPUT 4 terminal (S-VIDEO)
PC INPUT terminal (AUDIO)
INPUT 4 terminals (AUDIO)
PC INPUT terminal
(ANALOG RGB)
*
If the AVC System is switched on but it does not appear to be operating correctly, it may need resetting. In this
case, press
CLEAR
, shown in the diagram, lightly with the end of a ballpoint pen or other pointed object.
This will reset the System as shown below.
• AV MODE resets to USER.
• TV channel resets to channel 1.
• Dual screen resets to normal.
• Audio setting initialises.
• SRS resets to OFF.
• Image position is initialised.
NOTE
• Pressing
CLEAR
will not work if the System is in standby mode (indicator lights red).
• Pressing
CLEAR
will not delete channel preset or password. See page 58 for clearing the password when you know it.
See page 71 for initialising to the factory preset values when you forget your password.
Part names
AVC System
STANDBY/ON indicator
INPUT 4 terminal (VIDEO)
(How to open the door)
Front view
Rear view
Headphone
(When connecting headphones,
the sound from the speakers is
muted.)
ANTENNA INPUT
terminal
INPUT 3
terminal
(S-VIDEO)
INPUT 3
terminal
(VIDEO)
INPUT 3
COMPONENT
VIDEO terminals
(Y, P
B
, P
R
)
INPUT 3 terminals
(AUDIO)
INPUT 1 terminal
(S-VIDEO)
INPUT 1 terminal
(VIDEO)
INPUT 1 COMPONENT
VIDEO terminals (Y, P
B
, P
R
)
INPUT 1 terminals
(AUDIO)
RS-232C terminal
DISPLAY OUTPUT 1
terminal
AC INPUT terminal
DISPLAY OUTPUT 2
terminal
INPUT 2 terminals (AUDIO)
INPUT 2 terminal
(VIDEO)
INPUT 2 terminal (S-VIDEO)
MONITOR OUTPUT terminals (AUDIO)
MONITOR OUTPUT terminal (VIDEO)
MONITOR OUTPUT terminal
(S-VIDEO)
DC OUTPUT terminal (Terminal for
expanded functionality in the near future.)
