16
Basic Operation (Continued)
Switching the Input Modes (INPUT1/
INPUT2/INPUT3/INPUT4/INPUT5(PC)/TV)
Turn on the power of the connected video equipment.
Press
INPUT
to select the applicable input source. The
screen changes in order of INPUT1, INPUT2, INPUT3,
INPUT4, INPUT5 (PC) and TV mode each time
INPUT
is pressed.
A
• INPUT1 or INPUT2:
Used for video equipment connected to the COMPONENT input
terminals.
• INPUT3:
Used for video equipment connected to the INPUT3 termi-
nals.
The S-video input terminal is additionally provided for the
INPUT3 terminal. If both the S-video terminal and normal
video terminals are connected with cables, the S-video input
terminal takes priority.
• INPUT4/OUTPUT:
INPUT4 mode is used to adjust the preset settings and IN or
OUT can be selected. INPUT4 indication is not displayed
when OUT is selected. (For details on setting INPUT4
SELECT, see page
24
.)
• INPUT5:
If you connect the PC to the PC-IN terminals, you can view
the PC image on the LCD TV set.
1
2
INPUT 3 mode
I N P U T 3
I N P U T 5
P C
INPUT 5 (PC) mode
I N P U T 4
INPUT 4 mode
TV mode
2
I N P U T 2
4 8 0 P
I N P U T 1
4 8 0 P
INPUT2 mode
INPUT 1 mode
Sound Volume
■
To adjust the volume
●
Press
VOL (+)
to increase the sound volume.
The bar indicator shifts right.
VOLUME
5
0
●
Press
VOL (–)
to decrease the sound volume.
The bar indicator shifts left.
VOLUME
1
0
■
To mute the sound
●
Press
MUTE
to temporarily turn off the sound.
The MUTE mark
is displayed for 4 seconds.
●
Press
MUTE
or
VOL (+)/(–)
to turn the sound back to the
previous level.
The mute function is automatically turned off when any of
the following buttons are pressed:
POWER, MUTE,
VOL (+)/(–)
or
MTS
.
VOLUME
1
0
A
•
When
VOL (+)/(–)
is pressed in the Mute mode, the sound turns
on and the volume indicator is displayed.
•
The Mute function is canceled when
POWER
is pressed.
■
To select MTS (Multichannel TV Sound)
Press
MTS
to display the MTS screen.
Press
MTS
to select the MTS settings.
STEREO: stereo audio
SAP:
secondary audio program
MONO:
monophonic audio
STEREO
<
ON A I R
<
ON A I R
SAP
MONO
A
•
“ON AIR” appears when a STEREO or SAP broadcast is being
aired.
1
2
LC-20B
8
U_E_P13-18.p65 05.2.3, 2:04 PM
16
