Sharp Aquos LC 20B1U, Service Manual

Page: 12 / 70

LC-20B1U
12
Notes at the time of the side B(back) service of a digital unit
1. Remove PC card slot attachment angle fixed screws(2 pcs.).
2. Remove the FFC from a PC card unit.
3. Remove the grounding cable fixed screws(2 pcs.).
4. Remove the FFC for connection between digital unit (SC2001) and analog unit (SC3403), and connect the exten-
sion FFC for service(QCNW-A324WJZZ).
5. Remove the cable for connection between digital unit (P2004) and analog unit (P3702), and connect the extended
cable for service(QCNW-A323WJZZ).
6. Remove the chassis frame fixed screws(4 pcs.), it shifts to right-hand side, and remove the double-sided tape (for
digital unit (SC1203) - LCD panel connection FFC fixation) under a chassis frame.
7. Remove the RC/LED unit.
7-1. Open a wire holder.
7-2. Remove the RC/LED unit fixed screws(2 pcs.).
8. Remove the digital unit fixed screw(1 pc.), a substrate is reversed.
P3702
P2004 P2003
SC2001
SC3403
SC901
SC1203
ANALOG Unit
PC card
slot
DIGITAL
Unit
DIGITAL Unit
(side B)
RC/LED Unit
Wire Holder
7-2
7-1
5
4
6
8
2
1
3
8
1
3