Sharp AQUOS LC-19D45U Operation Manual Download Page 55

Page: 55 / 60

Using the kitchen remote control unit

Alarm set

Press

KITCHEN TIMER/CLOCK SET/

ALARM

repeatedly until ALARM ON icon on

LCD fl ashing.

Press

MIN/HOUR

repeatedly to set hour

portion of ALARM.

With in 30 seconds, press

SET/STOP

confi rm settings.

Press

SEC/MIN

repeatedly to set minute

portion of ALARM.

After ALARM set, LCD display will be showing
as below.

ALARM

• If there is no operation during setup within 30 seconds,

ALARM set procedure will be cancelled automatically.

• When beeper sounds, press

SET/STOP

to stop beeper

sound and set ALARM icon off.

You can set the timer to automatically turn on the TV

When time reaches ALARM set value, switch
the TV power on or enters standby and make
beeper sound about 30 seconds, then ALARM
icon on LCD goes out.

After displaying above information for about 5
seconds, LCD returns to clock display again
as below.

Alarm off

The ALARM set can be cancelled.

Press

KITCHEN TIMER/CLOCK SET/

ALARM

repeatedly until ALARM OFF icon on

LCD fl ashing.

ALARM

Within 30 seconds, press

SET/STOP

cancel ALARM set and LCD returns to normal
clock display as below.

• If there is no operation during setup within 30 seconds,

ALARM

reset procedure will be cancelled automatically.

• The initial value of

ALARM

is 12:00 AM.

• The

ALARM

set is valid only one time.

Backlight

Press

LIGHT

, backlight goes on for about 5 seconds

and then goes out.

Summary of Contents for AQUOS LC-19D45U





























































Search results

Summary of Contents for AQUOS LC-19D45U

Reviews:

Related manuals for AQUOS LC-19D45U

Brands by name

Popular brands

Sharp AQUOS LC-19D45U, Operation Manual

Search results

Summary of Contents for AQUOS LC-19D45U

Reviews:

Related manuals for AQUOS LC-19D45U

Brands by name

Popular brands