3
Quick guide
Attaching the stand
Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal.
1
Confirm the 3 screws supplied with the TV.
Screws (
m
3)
(used in step 3)
2
Insert the stand into the opening on the bottom of
the TV. (
1
)
3
Insert and tighten the 3 screws on the bottom of
the TV as shown. (
2
)
NOTE
• To detach the stand, perform the above steps in reverse order.
Before performing work spread cushioning over the base area to lay the TV on, making sure the
area is completely flat. This will prevent it from being damaged.
Setting the TV
Standard DIN45325 plug
(IEC 169-2)
75-ohm coaxial cable
*Ferrite Core
The Ferrite Core should be permanently attached
and never removed from the AC cord.
Alignment protrusions
Soft cushion
Screw
Hex key
AC cord
Place the TV close to the AC
outlet, and keep the power plug
within reach.
Cable clamp
Ferrite Core*
LC-19A1E_GB_a
07.9.14, 0:54 PM
3
Summary of Contents for Aquos LC-19A1E
Page 2: ......
