22
PinP
Sleep timer
Watching TV
HDMI Menu
HDMI setting
PC Mode
HDMI CEC
TV setup
According to your needs to set the options table.
General
Booting state
Standby indicator
Select from “Standard”,”Enhance”.
Select from “On” or ”Off”.
Select from “On” or ”Off”.
If you select “On”,HDMI Connected devices will keep
co-movement with TV.
NOTE
•
“TV”: When turn on the TV, it displays TV mode.
•
“Smart home”: When turn on the TV, it displays the smart
home.
You can set booting state between "TV" and "Smart
home".
Auto power-off at a designated time.
You can choose from “Off”, “30min.”, “60min.”,
“90min.”, “120min.” “150min.”or “Custom.”.
NOTE
•
When the time has been set, countdown automatically
starts.
•
Five minutes before the preset of time expires, the
remaining time displays each minute.
You can set indicator for TV standby.
Select from “On” or “Off”.
1
2
3
Press (
MENU
) to display the menu screen
in full-screen TV programs.
/
Press
to select "PinP" and then press
OK
.
If you want to return full screen,long press
in the TV remote,and then press
OK
.
HDMI select
,
Language
Advanced
Default input method
Super quick
Select from “Off”,“Super quick”.
No signal power off
Keypad sound
Select from “On” or ”Off”.
PinP size
Network
You can select a language from the menu.
Select from among 3 languages: “English”, “
繁體中文
”
or “
简体中文
”.
.
For setting input method.
NOTE
• The initial installation of the TV is “IQQI-International”.
•
If you use any other input method, SHARP cannot
guarantee its compatibility with television system.
You can set the TV to automatically power off in about
15 minutes after the TV goes into a state of receiving
no programme signals.
Five minutes before the power shuts down, the
remaining time displays every minute.
Select from “Big”,”Middle” or ” Small”.
Please see pages 24 to 25.
Digital audio language
Subtitle
Set up to preferred multi audio languages to display if
the audio languages are available.
NOTE
• This function depends on audio language information from
broadcasters.
• If audio for the selected language is not included in a
received broadcast, audio will not be output for that
Setup preferred subtitle language if the subtitle
languages are available.
NOTE
• If subtitles for the selected language are not included in
a received broadcast, subtitles will not be shown for that
language.
language.
