Sharp aqos, Operation Manual

Page: 18 / 113

>>
<<
Direct Button Operation
ENG 3-1
Changing Channels
You can change channels in several ways.
Method 1
Using
CH /
on the remote control unit.
Method 2
Using remote control buttons
0
-
9
, • (DOT).
Examples:
To select a 1 or 2-digit channel number (e. g., Channel
5):
Press
5 ENTER
To select a 3-digit channel number (e. g., Channel
115):
Press
1 1 5 ENTER
To select a 4-digit channel number (e. g., Channel
22.1):
Press
2 2
•
(DOT) 1 ENTER
Method 3
Selecting the program from the Channel list.
1
Press
INPUT
on the remote control unit.
The INPUT list displays.
2
Press / to select "AIR" or "CABLE".
The Channel list displays.
3
Press / to select the desired channel, and then press
ENTER
.
NOTE
When selecting a 1-digit channel number, it is not
necessary to press
0
before the number.
When you enter
0
-
9
only, channel selection will be made
if there is no operation within a few seconds.
If you push "0" by itself, nothing will happen.
Complete the above steps within a few seconds.
When you enter
0
-
9
and • (DOT), channel selection will
be made if there is no operation within a few seconds.