17
AN-PR1500H_EN.fm
06/3/14
AN-PR1500H
TINSEA127AWZZ
1
Preparation for Use
AC power connection
Connecting the AC power lead
After checking all the connections have been made correctly, connect the AC power
lead to the wall socket.
Note:
Unplug the AC power lead from the wall socket if the unit will not be in use for a
prolonged period of time.
To turn the power on
Press the ON/STAND-BY button.
If the power does not turn on, check whether the power lead is plugged in properly.
To set the unit to stand-by mode:
Press the ON/STAND-BY button again.
Note:
After the unit enters the power stand-by mode, wait a few seconds to turn on again.
Demonstration mode
Wall socket
(AC
220
-
240
V ~
50
Hz)
The first time the unit is plugged in, the unit will enter the
demonstration mode. You will see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-by mode
(demonstration mode), press the SHIFT and DEMO
buttons on the remote control. The unit will enter the low
power consumption mode.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the SHIFT and DEMO buttons
on the remote control again.
