Sharp AN-LS1, Operation Manual, Page: 27 / 55

27
Using the Software
•
Please change the destination only when necessary. (In general, it is not necessary to change
the destination folder.)
•
If “Cancel” is clicked, “Exit Setup” dialog will be displayed.
•
If “Yes” is clicked, the Sharp COM Redirection Software Driver is not installed. If you want to
install later, run Sharp COM Redirection Software using “Add or Remove Programs”.
•
Click “No” to continue the installation.
If no dialog box is displayed after waiting a while:
(1) Select “Run” from the “Start” menu.
(2) Input “R:\SOFTWARE\SETUP.EXE” and click “OK”.
(If the CD-ROM drive is different from the R drive, please input the correct drive name.)
Downloaded from: http://www.usersmanualguide.com/