XL-UR230/250/2110HE QG
1/17/07, 4:44 PM
2
3
Remote control battery installation
5
To turn the power on
4
Connecting the AC power lead
1
Open the battery cover.
2
Insert the batteries as shown.
3
Close the cover.
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Notes:
Press the ON/STAND-BY button.
If the power does not turn on, check whether the power lead is plugged in properly.
To set the unit to stand-by mode:
Press the ON/STAND-BY button again.
Note:
After the unit enters the power stand-by mode, wait a few seconds to turn on again
Wall socket
(AC 220 V- 240 V, 50 Hz)
After checking all the connections have been made correctly,
connect the AC power lead to the AC power input socket, then
to the wall socket.
Never use a power lead other than the one supplied. Other-
wise, a malfunction or an accident may occur.
Unplug the AC power lead from the wall socket if the unit will
not be in use for a prolonged period of time.
