Sharp AL-841, Service Manual, Page: 8 / 28

22
-
17
Purpose Operation data output/Check (Display/Print)
Function
(Purpose) Used to check the copy count number.
Item Counter Copier
Operation/
Procedure The display format and the method are same as SIM
22-5 (Total printer counter display).
22
-
18
Purpose Operation data output/Check (Display/Print)
Function
(Purpose) Used to check the print count number.
Item Counter Printer
Operation/
Procedure The display format and the method are same as SIM
22-5 (Total printer counter display).
22
-
21
Purpose Operation data output/Check (Display/Print)
Function
(Purpose) Used to check the count of use (count of scanning)
of the scanner (reading) unit.
Section Optical (Image scanning)
Item Counter
Operation/
Procedure The display system and the method are the same as
those of SIM 22-5 (Total print counter display).
24
24
-
1
Purpose Data clear
Function
(Purpose) Used to clear the mis-feed (jam) counter in the
machine.
Item Counter
24
-
8
Purpose Data clear
Function
(Purpose) Used to clear the copy counter.
Item Counter Copier
24
-
9
Purpose Data clear
Function
(Purpose) Used to clear the print counter.
Item Counter Printer
26
26
-
2
Purpose Setting
Function
(Purpose) Used to set Enable/Disable of the SPF and the FAX
functions. (When a trouble occurs in the SPF and the
FAX section, disable those functions to allow only
copying and scanning functions.
Section ADF/RADF/UDH/SPF
Item Specifications
Operation/
Procedure When this simulation is executed, the code of current
setup of ENABLE/DISABLE of SPF/FAX function is
displayed.
Enter the desired code number corresponding to Enable/Disable
setup and press the Start button, and the setup will be effective.
Set code number SPF/FAX function
0 Disable
1 Enable
26
-
6
Purpose Setting
Function
(Purpose) Used to set the destination.
Item Specifications
Operation/
Procedure 1) The currently set code of the destination is
displayed.
2) To change the set content, enter the code of your desired
setting and press the start button.
Destination code Detected paper size
Set
value
Destination
Paper
type
Paper width
detector ON
Paper width
detector OFF
0
Inch
series
11
5
8.5/
14
5
8.5
8.5
5
5.5/
8.5
5
11
1 EX Japan
AB
series
A4 (210
5
356 mm)
A5
2 Japan
AB
series
A4 (210
5
356 mm)
B5
When the set value is changed, the paper size specification and the
fixed, enlarged, and reduced copy magnification ratios are changed.
26
-
7
Purpose Setting
Function
(Purpose) Used to set the model (hardware) specifications.
Section PCU
Item Specifications Operation mode (Common)
Operation/
Procedure When this simulation is executed, the monitor lamp
corresponding to the model (hardware) is displayed.
Copy quantity display Copy speed (CPM)
6 6cpm
8 8cpm
AL-841
– 6 –