Sharp AL 800 - B/W Laser - Copier Operation Manual Download

Page: 37 / 51

Copier trouble?

MISFEED REMOVAL

The fusing unit is hot. Do not touch the fusing unit when removing misfed paper.
Doing so may cause a burn injury.

Do not touch the surface of the drum (green portion) of the drum cartridge.
Doing so may damage the drum and cause smudges on copies.

Remove the misfed paper by grasping the end of the paper nearest you and pulling it
gently in a straight line.

Replace the drum cartridge. (See page 29, DRUM CARTRIDGE REPLACEMENT.)

Replace the TD cartridge. (See page 28, TD CARTRIDGE REPLACEMENT.)

Close the front cover.

C. Misfeed in the exit area

Push gently on both sides of the front cover to open the cover.

Remove the misfed paper from the exit area by grasping the end of the paper and
pulling it gently in a straight line.

Do not pull the misfed paper with the front cover closed, as you may tear it or
damage the printing mechanism. Be sure to open the front cover and then
remove the misfed paper.

Close the front cover.

Summary of Contents for AL 800 - B/W Laser - Copier




















































Search results

Summary of Contents for AL 800 - B/W Laser - Copier

Reviews:

Related manuals for AL 800 - B/W Laser - Copier

Brands by name

Popular brands

Sharp AL 800 - B/W Laser - Copier, Operation Manual

Search results

Summary of Contents for AL 800 - B/W Laser - Copier

Reviews:

Related manuals for AL 800 - B/W Laser - Copier

Brands by name

Popular brands