Sharp AL-1640 - B/W Laser - Copier Operation Manual Download | Manualshive

Page: 3 / 60

background image

2

GETTING ST

ARTED

Cautions

CAUTIONS

Follow the cautions below when using this copier.

●

The fusing area is hot. Exercise care in this area when removing misfed paper.

●

Do not look directly at the light source. Doing so may damage your eyes.

●

The socket-outlet shall be installed near the equipment and shall be easily accessible.

●

Place the copier on a firm, level surface.

●

Do not install the copier in a humid or dusty location.

●

When the copier is not used for a long time, for example, during prolonged holidays, turn the
power switch off and remove the power cord from the outlet.

●

When moving the copier, be sure to turn the power switch off and remove the power cord from the
outlet.

●

Do not cover the copier with a dust cover, cloth or plastic film while the power is on. Doing so may
prevent heat dissipation, damaging the copier.

SAFETY PRECAUTIONS

This Digital Copier is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the CDRH standards. This
means that the copier does not produce hazardous laser radiation. For your safety, observe the precautions below.

●

Do not remove the cabinet, operation panel or any other covers.

●

The copier’s exterior covers contain several safety interlock switches. Do not bypass any safety interlock by
inserting wedges or other items into switch slots.

Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous laser radiation exposure.

«
1
2
3
4
5
...
»

Summary of Contents for AL-1640 - B/W Laser - Copier





























































Reviews:

No comments

Related manuals for AL-1640 - B/W Laser - Copier

Brand: Panasonic Pages: 62

Aficio Color 3131

Brand: Gestetner Pages: 224

Brand: Triumph Adler Pages: 163

Brand: Triumph Adler Pages: 211

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands