Sharp AL-1600, Operation Manual

Page: 26 / 47

33
GENERAL INFORMA
TION
4 Select the desired parameter using the right copy quantity
(
) key.
● The entered parameter number will blink on the right side of the copy
quantity display.
● The parameters are shown in the table below.
For example, to change the setting of the auto power shut-off timer to
60 min., enter 2.
USER PROGRAMS
User programs
Program name Parameters
Auto clear time 0
e
OFF 1
e
30 sec. * 2
e
60 sec. 3
e
90 sec. 4
e
120 sec.
5
e
10 sec.
Preheat mode 0
e
OFF 1
e
30 sec. 2
e
60 sec. * 3
e
90 sec. 4
e
120 sec.
Auto power shut-off timer * 1
e
30 min. 2
e
60 min. 3
e
90 min. 4
e
120 min. 5
e
240 min.
Auto power shut-off setting 0
e
OFF * 1
e
ON
Paper size setting 1
e
11"x17" 2
e
8-1/2"x14" * 3
e
8-1/2"x11" 4
e
8-1/2"x11"R
5
e
5-1/2"x8-1/2"
Factory default settings are indicated with an asterisk (*).
If you select “0” (OFF) in a program, the corresponding function will be disabled.
5
Press the START ( ) key.
● The right-hand number in the copy quantity display will be steadily lit
and the entered value will be stored.
6 To continue with other user programs, press the CLEAR
(
) key and then repeat steps 2 to 5. To exit the user
program mode, press the light ( ) key.
● All the alarm indicators will go out.