Sharp AL-1045 Operation Manual Download

Page: 72 / 88

ABOUT SUPPLIES AND OPTIONS

When ordering supplies, please use the correct part numbers as listed below.

Supply list

* Based on copying onto A4-type paper at 5% toned area

(The life of the TD cartridge which has been included in the unit at the factory is
approximately 2,000 sheets.)

Interface cable

Please purchase the appropriate cable for your computer.

Parallel interface cable

IEEE 1284-Shielded type bi-directional parallel interface cable (2m Max.)

USB interface cable

Shielded twisted pair cable, high-speed transmission equivalent (2m Max.)

Be sure to use only genuine SHARP parts and supplies.

For best copying results, be sure to use only SHARP Genuine
Supplies which are designed, engineered, and tested to maximize the
life and performance of SHARP copiers. Look for the Genuine
Supplies label on the toner package.

Supply

Part number

Usable life

TD cartridge

AL-110DC

Approx. 4,000 sheets *

Drum cartridge

AL-100DR

Approx. 18,000 sheets

Summary of Contents for AL-1045

























































































Search results

Summary of Contents for AL-1045

Reviews:

Related manuals for AL-1045

Brands by name

Popular brands

Sharp AL-1045, Operation Manual

Search results

Summary of Contents for AL-1045

Reviews:

Related manuals for AL-1045

Brands by name

Popular brands