33
AH-S22DP2
AH-S25DP2
AH-S32DP2
DUST SENSOR
GAS SENSOR
THERMISTOR
CN101 and CN102
6. Remove 2 connectors.
7. Pull the board.
Drain pan and related
1. Remove 3 screws fixing motors.
2. Turn the cap area of the drain hose counterclockwise,
and remove it from the drain pan.
During installation, turn the drain hose to the state of
the “engagement position”.
After reinstallation, verify that it is securely fastened.
How to remove the horizontal louver
Slightly pull down the hinge area, deflect the louver, and
unhook it from the hinge. Remove the shaft from each of
the left and right sides.
Drain pan
Drain Hose
Groove
Projection
To disconned
To reconnect
How to remove the HI VOLTAGE UNIT.
1. Remove the HIGH VOLTAGE UNIT.
(Press and spread the hook, and HI VOLTAGE will
be ready for removal.)
How to remove the DUST SENSOR, the THERMISTOR
and the GAS SENSOR.
Remove the DUST SENSOR, the THERMISTOR, and
the GAS SENSOR.
(Press and spread the hook,and GAS SENSOR will be
ready for removal)
How to remove the display board unit 2.
The display board unit 2 is pushed in the direction of
arrow 1 .
And it is made to slide in the direction of arrow 2 , and
remove.
display board unit2
1
2