8
AF-T908X
AF-R908X
AF-R1108X
AF-R1208X
Front panel
Screws
Remove the pad.
Closure assembly
3-1. Unscrew the 6 stopper screws of the cabinet. Keep the 4
screws from the top and front , as they will be used later.
3-2. Slide the chassis out from the cabinet by pulling on the hand
hold located at the bottom center of the chassis.
3-3. Remove the pad in side of the compressor.
CAUTION: Do not remove any material (ex. styrofoam, etc.) from
inside the unit.
4. Insert the right closure assembly and the left closure assembly
into the top angle and the bottom channels.
Secure the right and left closure to the cabinet with 6 of the
provided screws. (L= 13/32", 10 mm)
5. Open the window sash and place the cabinet on the sill. The
cabinet should be inclined backward by approx. 3/8 inch (9.5
mm).
Close the window sash securely behind the top angle.
6. Insert the closure assemblies on both sides into the rails of
the jamb.
About
3/8inch(9.5mm)
Indoor
side
Jamb
(Left)
Sill
1/2 inch (13mm)
Closure assembly
(Left)
Stool
Closure assembly
(Left)
2. Open the box of the front panel assembly and take out the front
panel and 2 screws.
